HOME | DD

Description
I AM NEVER DOING THIS AGAIN! I refuse to rebuild this ship at any point! I was lucky enough not to screw up while building it this first time, but I swear it just takes forever with how much detail was actually put into the original ship. The original design used stone for the main hull color with stone bricks for the darker sections, with stone slabs, some iron blocks for the UNSC logo, and some bedrock in some places on the engines. But due to me using the Xbox One Halo Mash-up pack on my computer, it would've looked stupid that way, so I rebuilt the entire thing from the bottom up with blocks from my texture pack. For the hull color I used stone bricks, while the dark areas I used Bricks and used cobblestone slabs for specific zones, and just used the white wool for the logos, as well as just using Spruce wood blocks for the engine vents due to the blocks dark gray color. Now I just need to go back and do the entire interior section by section, I all did build was the base floor for the main hangar bay with the doors accessing into one of the ladder zones in the hangar, as well as doing all 3 rooms in the command tower: the bridge, the room behind the bridge, and the back room which includes the ladders to go down. If your wondering how hard it was for me, first I started by building all layers from the very bottom up to the first layer above the hangar floor, then I decided to try and split the ship in half by building the entire back section first since it includes a lot of detailing which you can't really see unless you go around the hull covers. I then completed the bottom engine as well as the two large engines, I then completed the wings and built up the main hull frame. I then pushed construction to the first 2 blocks on the left wall of the hangar entrance and proceeded to build up layer by layer, and successfully finished the back section after countless struggling. After the entire back 2/3rds of the ship had been completed, I went and finished up the front part which just as much detailing and shaping out that you would have to deal with.
Original design by Primosupert, ship can be found on planetminecraft although its labeled as UNSC Frigate, rebuilt by me. Now if you don't mind I will begin my long hours of struggling to fill in the interior.

Description
I AM NEVER DOING THIS AGAIN! I refuse to rebuild this ship at any point! I was lucky enough not to screw up while building it this first time, but I swear it just takes forever with how much detail was actually put into the original ship. The original design used stone for the main hull color with stone bricks for the darker sections, with stone slabs, some iron blocks for the UNSC logo, and some bedrock in some places on the engines. But due to me using the Xbox One Halo Mash-up pack on my computer, it would've looked stupid that way, so I rebuilt the entire thing from the bottom up with blocks from my texture pack. For the hull color I used stone bricks, while the dark areas I used Bricks and used cobblestone slabs for specific zones, and just used the white wool for the logos, as well as just using Spruce wood blocks for the engine vents due to the blocks dark gray color. Now I just need to go back and do the entire interior section by section, I all did build was the base floor for the main hangar bay with the doors accessing into one of the ladder zones in the hangar, as well as doing all 3 rooms in the command tower: the bridge, the room behind the bridge, and the back room which includes the ladders to go down. If your wondering how hard it was for me, first I started by building all layers from the very bottom up to the first layer above the hangar floor, then I decided to try and split the ship in half by building the entire back section first since it includes a lot of detailing which you can't really see unless you go around the hull covers. I then completed the bottom engine as well as the two large engines, I then completed the wings and built up the main hull frame. I then pushed construction to the first 2 blocks on the left wall of the hangar entrance and proceeded to build up layer by layer, and successfully finished the back section after countless struggling. After the entire back 2/3rds of the ship had been completed, I went and finished up the front part which just as much detailing and shaping out that you would have to deal with.
Original design by Primosupert, ship can be found on planetminecraft although its labeled as UNSC Frigate, rebuilt by me. Now if you don't mind I will begin my long hours of struggling to fill in the interior.