HOME | DD
flaketom — pffffffff
#3d #aircraft #ciws #gatling #gunship #helicopter #military #sketchup
Published: 2015-07-20 16:14:11 +0000 UTC; Views: 20199; Favourites: 323; Downloads: 315
Redirect to original
Description
The XXX is a heavy modular attack helicopter. The base version of the it is easily converted, to fulfill different roles. These include an artillery variant, a gunship variant for ground support, a long range laser variant to take down precisely heavy targets and an anti air version. With a crew of three it is meant to operate for extended periods being also able to form something like a flying wall, defending larger territories against air strikes or threats on the ground. Equipped with four hardpoints on the hull and two exchangeable wings for different roles it can carry a huge variety of sensors and weapons.Medium armored it relies mostly on its passive and active countermeasure systems, being independent of other systems and needing not much support against missile, rocket and to an amount gun attacks. It carries his on ECM and ECCM system with a base version built in and two wing pylons reserved solely for ECM pods.
The version seen here is the point defense variant for detecting and destroying incoming missiles and aircraft, equipped with a gatling and 3 RAM turrets.
A ground support version can be seen here.
flaketom.deviantart.com/art/pf…
Couldn't come up with a proper name, just happy my Computer didn't break down while modelling this.
More pictures here:
sta.sh/0a3w0qy7iq7
sta.sh/066009dnsg
sta.sh/010evqu679h7
sta.sh/0mc6l36zlcr
sta.sh/010o9sd932o
sta.sh/06r5w8lmzkk
sta.sh/01uf4qz0p2f9
Rough landing sketch:
flaketom.deviantart.com/art/La…
Rough technical details:
flaketom.deviantart.com/art/Uh…
And as always hope you like it and comments and crits are welcome!!!
Related content
Comments: 91
No need for peace after everything is annihilated....
👍: 0 ⏩: 1
The more [firepower] the merrier
👍: 0 ⏩: 0
"overkill" word doesn't even come close to this beast
👍: 0 ⏩: 1
hahaha
But actually there is place for more...
👍: 0 ⏩: 0
Never! If it is out of ammo it's thrown away! Possibly ontop of the enemy!
Naa. thought of an akward way, with the turret going up a tad and two legs rotating out from the side boxes, and the tail fin acting as third leg. But was too lazy to model that...
👍: 0 ⏩: 1
Here you can see a very rough sketch of it landed: sta.sh/02255xjfnzas
👍: 0 ⏩: 1
...................###.......................... ...... . 
👍: 0 ⏩: 0
This heli won't even have to fire. As soon as enemies see it, its sheer size, they will be like, "Let's get the hell out of here." XD
👍: 0 ⏩: 1
Ladies and gentlemen, I present to you the gunship from hell.
👍: 0 ⏩: 1
Then it defintely needs a new paintjob
👍: 0 ⏩: 0
It only takes 5 years to refill all the ammunition
👍: 0 ⏩: 1
Duh!
But then again one swipe should be enough for the whole war
👍: 0 ⏩: 1
Awesome!!!
Check out my latest artwork kaidash.deviantart.com/art/Sky…
Thank you!
👍: 0 ⏩: 1
Damn that's one busy Helicopter.
👍: 0 ⏩: 1
What does it look like after it transforms into a mech? 
👍: 0 ⏩: 1
haha. Damn now I need to model that one....
👍: 0 ⏩: 0
Damn I feared someone might say this.
👍: 0 ⏩: 1
Well it could use more dakka or have a bunch to unleash a lot of dakka at once.
👍: 0 ⏩: 0
More CIWS batteries than you can shake a stick at. This thing is made of turrets and ammunition
👍: 0 ⏩: 1
crits... ok. decipher this crappy engrish, mwahaha ))
this pffff has an aerodynamics of a train fo sho
double rotors are too close to each other - they will not going to work
and tail doesn't have small stabilizer - it won't gonna work ether
-
from position of design and creativity - it looks like you took details of a ship and make it airborne
👍: 0 ⏩: 1
Adding a rotor to a ship kind of describes it now that you say it.
And with the two counter rotating rotors you don't need a stabilizer on the tail. And yeah them two rotors are too close but it just looked way cooler...
Thanks for the comments!
👍: 0 ⏩: 0
Thanks mate! Much appreciated!
👍: 0 ⏩: 0
is awesome!!!, if you do not mind, could you tell me what are the plugins you use? sorry for my English.
👍: 0 ⏩: 1
Thanks a ton! I used the joint push pull and bevel edges plugins. That's about it.
👍: 0 ⏩: 0
Oh my goodness. This is incredible. Your lack of fear in the eyes of polycount always amaze me dude. Seriously, this jaw dropping.
👍: 0 ⏩: 1
Thanks man, glad to hear that you like it! And I am just trying to compensate my lack of being able to do simple and clean things with all the polycountmadness
👍: 0 ⏩: 1