HOME | DD

Description
I have had some questions about this suit and my previous tutorial so I added some pictures. Hopefully theese pictures makes it easier to see how the pieces fit together.

below is the comment text from the previous tutorial

This is a tutorial on how i built my tau commander

you will need:
1 Crisis suit
2 stealth suits
3 gun drones
2 tau landing gears
4 necron scarabs

First cut the crisis suit torso as described in the picture
and glue the jetpacks on the space shown in the picture

Cut the front of a stealth suit and glue it to the front of the crisis torso (this is normally the back of the suit, also the torso is turned upside down so from now on when i refer to a direction such as up i mean to what is going to be the upside on the finished suit)

glue the head

then glue a stealth suit torso over the hole where you normally attatch the head with the face of the stealth suit looking down

cut the legs under the knee and cut the landing gears as shown in the picture. cut the legs of the scarabs

glue the landing gear between the two leg parts and attach the footglue the scarabs over the join between the lower leg and the landing gear and use stealthsuit shoulderpads as knee guards then glue the legs in place in the stealthsuit armsockets

cut a gundrone in half and glue the halves on either side of the stealthsuit front glued to the torso

cut of the shoulders from the crisis suit arms and glue them on either side of the head above the balls where you attach
the arms

cut of about half of the arm ball joints and glue the hands on to them then glue the two remaining gundrones onto the hands

Build awesome weapons and stuff and attatch to the arms

glue fancy bits such as antennas and stuff on the battlesuit

paint

done

As you can see in the picture my regular suits are a bit different, not using the stealth suit and gun drones on the torso.

Again if you have trouble dont be afraid to ask, best of luck
/ mipcap

Description
I have had some questions about this suit and my previous tutorial so I added some pictures. Hopefully theese pictures makes it easier to see how the pieces fit together.

below is the comment text from the previous tutorial

This is a tutorial on how i built my tau commander

you will need:
1 Crisis suit
2 stealth suits
3 gun drones
2 tau landing gears
4 necron scarabs

First cut the crisis suit torso as described in the picture
and glue the jetpacks on the space shown in the picture

Cut the front of a stealth suit and glue it to the front of the crisis torso (this is normally the back of the suit, also the torso is turned upside down so from now on when i refer to a direction such as up i mean to what is going to be the upside on the finished suit)

glue the head

then glue a stealth suit torso over the hole where you normally attatch the head with the face of the stealth suit looking down

cut the legs under the knee and cut the landing gears as shown in the picture. cut the legs of the scarabs

glue the landing gear between the two leg parts and attach the footglue the scarabs over the join between the lower leg and the landing gear and use stealthsuit shoulderpads as knee guards then glue the legs in place in the stealthsuit armsockets

cut a gundrone in half and glue the halves on either side of the stealthsuit front glued to the torso

cut of the shoulders from the crisis suit arms and glue them on either side of the head above the balls where you attach
the arms

cut of about half of the arm ball joints and glue the hands on to them then glue the two remaining gundrones onto the hands

Build awesome weapons and stuff and attatch to the arms

glue fancy bits such as antennas and stuff on the battlesuit

paint

done

As you can see in the picture my regular suits are a bit different, not using the stealth suit and gun drones on the torso.

Again if you have trouble dont be afraid to ask, best of luck
/ mipcap