HOME | DD

Description
Flora! You've been laminated!!
Flora, from the webcomic TwoKinds by . He posted this to his Twitter . I believe he distributed higher-resolution bookmarks at "NekoCon;" fortunately I was able to enhance it to a similar quality!
©Thomas Fischbach, all rights reserved.

Bookmarks are sized to about 2 3/8" x 7" I also made a larger one as a gift for . It did not turn out as well, as I was pushing the upper limit of my scaling software, and too close a look revealed poor Flora's pixels.

I utilized as much of the space on an 8 1/2" x 11" sheet of paper as I could, so you end up with not one, but two bookmarks! I do not recommend duplex-printing these, as the printer will likely fail to line them up quite right.

I also recommend printing them out on Glossy Photopaper, cuting them out, placing them back-to-back, and laminating (or clear packing tape, etc.) the two halves together. At least, that's what I did.

Want to see the finished product?
The Finished Product by BlazeFirethorn [only the two on either side]
Action Shot by BlazeFirethorn

Yes, I like the idea of laminating some for you! No, I will not actually do so; I would charge for time and supplies, and that would be making money off of artwork that does bot belong to me!

--
Enhanced and enlarged by 300% of the original image quality and size by me with PhotoZoom Pro 2, and scaled with Corel PhotoPaint X6. QR Code edited out with Corel PhotoPaint X6.

Description
Flora! You've been laminated!!
Flora, from the webcomic TwoKinds by . He posted this to his Twitter . I believe he distributed higher-resolution bookmarks at "NekoCon;" fortunately I was able to enhance it to a similar quality!
©Thomas Fischbach, all rights reserved.

Bookmarks are sized to about 2 3/8" x 7" I also made a larger one as a gift for . It did not turn out as well, as I was pushing the upper limit of my scaling software, and too close a look revealed poor Flora's pixels.

I utilized as much of the space on an 8 1/2" x 11" sheet of paper as I could, so you end up with not one, but two bookmarks! I do not recommend duplex-printing these, as the printer will likely fail to line them up quite right.

I also recommend printing them out on Glossy Photopaper, cuting them out, placing them back-to-back, and laminating (or clear packing tape, etc.) the two halves together. At least, that's what I did.

Want to see the finished product?
The Finished Product by BlazeFirethorn [only the two on either side]
Action Shot by BlazeFirethorn

Yes, I like the idea of laminating some for you! No, I will not actually do so; I would charge for time and supplies, and that would be making money off of artwork that does bot belong to me!

--
Enhanced and enlarged by 300% of the original image quality and size by me with PhotoZoom Pro 2, and scaled with Corel PhotoPaint X6. QR Code edited out with Corel PhotoPaint X6.