HOME | DD
dronner66 — M-36 Assault Rifle
Published: 2010-08-05 21:33:22 +0000 UTC; Views: 3299; Favourites: 23; Downloads: 288
Redirect to original
Description
This is the M-36 assault rifle. It was designed for a Private Military Company, or PMC for short,based in the Middle East. Due to company policies, I can not give you their name. In their description they wanted a design that was cheap to make and repair, along with being light and durable. Our answer was this. The M-36's body made of stamped aerospace aluminum and plastic composites. This makes it cheap to mass produce and very light. The M-36 also uses a small amount of simple moving parts to fire, making it very durable.For repairs and cleaning there is a small tool kit in the tube hand grip behind the built in flash light.
There are two models of the M-36 assault rifle. These include the standard(top), and a spec ops version.
Made using PMG.
Related content
Comments: 14
Just trust me, there is plenty of room to fit ur hand there...
👍: 0 ⏩: 0
Looks to me like it would be uncomfortable to use. The magazine looks too close to the grip.
👍: 0 ⏩: 1
nope there is plenty of room. Think of like ur using a gun with a molded grip, like the FN F2000, and the space between the grip and the mag as the hole that ur thumb fits in. Do u see what im saying?
👍: 0 ⏩: 1
Ah, true about the F2000 grip, but with the F2000 there is still more room between your hand and the magazine. If you compair the F2000's molded grip to a standard pistol grip you can better see where the magazine is in relation to the grip.
👍: 0 ⏩: 1
trust me, there is plenty of room
👍: 0 ⏩: 1
All u need for ur thumb to fit is a half dollar sized space, and I'm pretty sure it would work.
👍: 0 ⏩: 1
True. I agree there is room for your thumb; though, I still think this design would be uncomfortable.
👍: 0 ⏩: 0
Still seems a little unstable with just the one mag lock.
👍: 0 ⏩: 1
oh, there's another on the other side. Its just there to keep the mag from jostling around to much.
👍: 0 ⏩: 0
This caught my attention, why does it look like the clip is attached to the handle by a small piece at the bottom? It seems that would make reloading very difficult or even impossible since that screw looks like it's going right through it to keep it in place.
👍: 0 ⏩: 1
It's not screwed into the grip. That's a guide to keep the clip in place. What touches the mag is a little rubber stopper on each.
👍: 0 ⏩: 1
ah ok, thanks for that. It was hard to tell from that angle. Definitely a cool rifle though.
👍: 0 ⏩: 1
