HOME | DD
Epicsunrise β Prototype MP Spec-A
Published: 2012-04-21 15:15:19 +0000 UTC; Views: 2644; Favourites: 80; Downloads: 30
Redirect to original
Description
A prototype machine pistol developed by specter and designed for CQC and Spec Ops.The Spec-A is chambered in 5.7x28mm with a 30 round capacity with full and semi auto fire.The Spec-A also features a threaded and capped barrel for suppressors and is able to have an added folding or retractable stock as well as a rail for optics.I might be adding some extra details later but tell me what you think
Related content
Comments: 52
Neither.I made this my self using a program called Pimp My Gun,It's free.
π: 0 β©: 0
Very good design. The hand grip in the front could be very nice.
π: 0 β©: 0
I'll reserve two for you
π: 0 β©: 1
I like it
came out cool, its just very very dark xD
π: 0 β©: 1
another person said the same thing but then said his monitor was set to dark.I was re coloring it but it doesn't look that good in a lighter grey.
π: 0 β©: 1
yeah.
I have a good moniter, I have to move my head around to see it xD
π: 0 β©: 1
seems like a cool weapon, my only concern is that the grip in the front (it looks like a grip to me) seems to be a little to close to the barrel if the shooter is not carefull enough he might end up blowing his finger(s) off, then again the mac 10 has the same problem so this is just my concern.
π: 0 β©: 1
I had the same concern when building it but I think the hand placement is obvious enough that a shooter wouldn't get hurt...that often :b
π: 0 β©: 1
then again if ur stupid enough to not watch were your hand is on the gun u shouldn't be using one XD.
π: 0 β©: 1
the only other thing i can think of is putting a thump hole in the grip so that your thump stays away from the barrel while your firing, other then that i would love a couple sent to my house ASAP.
π: 0 β©: 1
Well your thumb would be out of the way,I would be more concerned with your index finger.
π: 0 β©: 0
Okay, now it comes together.... The mag is far enough back that it would be difficult, just teach them to use the forward grip as intended and not the magazine, no matter how inviting the idea is.... I'll take mine with threaded barrel for a suppressor and compact stock of some sort, please! Does it come in Winter camo for the, Alaskan (Me)?
π: 0 β©: 1
Of coarse.I can re color it very quickly and I was messing around with a small solid stock that looked nice and a collapse able one.The barrel is threaded but there being a cap on the end Isn't that noticeable I guess.
π: 0 β©: 1
My next question, the grip is really forward, is there some concern about the shooter burning their hand with the repeated exposure to muzzle flash, when in full-auto fire?
π: 0 β©: 1
Well yeah that is a concern but I figure It's a small charged cartridge and if you use a compensator or flashhider that might lower the risk.
π: 0 β©: 1
Most likely, I just figured I'd bring it up, seeing as they ran into that problem with the MP5K PDW and how they use the grip on the handguard...
π: 0 β©: 0
small enough to fire without too much recoil. A very nice little package.
π: 0 β©: 0
the magazine doesn't exactly line up with the bolt. Other than that, I hold no complaint.
π: 0 β©: 1
Yeah I know and Have come up with a feeding method for that design decision.As the bolt moves back it grabs a round and moves it into position to be chambered as the first spent shell is being ejected.It's a lot clearer in my head :b
π: 0 β©: 1
I can kinda picture it as well, now that you describe it.
π: 0 β©: 0
I typed "W.T.F" because I was surprised. Surprised because this gun looks like a modern Skorpion S.M.G.
π: 0 β©: 1
Oh ok. Wasn't sure what you meant.Thanks man.
π: 0 β©: 0
dude! nice! but try to make the color a little lighter so we can see details better
π: 0 β©: 2
Hmm,yeah I was worried about that.
π: 0 β©: 0
actually ignore what i said i just realized my screen brightness was very low
π: 0 β©: 1
Lol,Good thing you posted because I was just re coloring it.
π: 0 β©: 1
do you have the code for the receiver i would love to do something with it one of these days.
π: 0 β©: 1
I actually up loaded the receiver separately with the paste data.
π: 0 β©: 1
yeah i saw that a minute after i asked you. but yeah i made something with it already!
π: 0 β©: 1
Cool,looking forward to seeing it
π: 0 β©: 0
I guess in fact of itΒ΄s size it would fit into my pocket as PDW xD
Great work dude!
π: 0 β©: 1
Hmm,well yeah.I was worried about the size comparison with the caliber used and I think I will change it.
π: 0 β©: 1
hmm i think the caliber fits good
π: 0 β©: 2
There we go,I just shrunk the mag a bit.
π: 0 β©: 1
Well I in visioned it being a bit bigger than a scorpion MP so I think the round compaired to the mag size is off.
π: 0 β©: 1
Very nice job. It's cool to see people using rifle parts to make pistols. Haha.
π: 0 β©: 1
Thank you!.I love using existing parts in new ways.
π: 0 β©: 1
I really wish there was more of a selection in the new version.
π: 0 β©: 1
| Next =>