HOME | DD

Description
Submission by: -- [See Her Gallery]
Full Title: "Fur Tutorial by The-ShadowCat"
Please leave all comments and favorites with the original work [Here]
[Add to Favorites shortcut]

=The-ShadowCat 's Description:
This is a Tutorial on how to make fur in Adobe Photo Shop
Some of these steps are how I like to do it, you might have you're own way to do these. The fur is basicly step 4 and 5
Remember to use many layer sets, named properly, and layers named properly to more easily find you're way among the layers.

~~~

1. Sketch
2. Basic Color
3. Shading
4. Fur part 1
5. Fur part 2
6. Shadow

~~~

1. Sketch
Make the sketch. Personly I like to do it on a paper. (Notice, this sketch was tiny ) Can also be done on the computer

2. Basic Color
The cleanest way to color is with the pencil. With the fur tecnique the edges will be smudged anyway. (I usually use the brush to get fine smudgy edges when I don't make this kind of fur)
Color it with the basic color's, using the paint bucket.

3. Shading
First thing first: make a new empty layer. Use the paint bucket, don't use anti-aliased, use contigious and all layers.
Fill in the uotline and one area with the same color. Erase the lineart that isn't in contact with the area. Have bouth in the same color.
If you do this with al areas, they will overlap a little (since you have the outline on them al) Remember to sort them after who overlaps who! (The overlaping one must be over the other one in the layer order)
Now, with al areas on a seperate layer, the shading can start. This is the easy way: Lock layer transparacy (found on top of the layer guide)
Now you can draw outside the area without painting there!
When I shade I use a huge brush, 17 on flow, airbrush. Then just play around with many shades, use white and black on the extrems, and many shades of the color.
Doing it like that I feel it's almost like the colors melt together.

4. Fur part 1
The shading is done, now comes the FUR!
To make the fur, go to Filter/Noise/Add Noise... I found 20%, Uniform and Monochromatic as a good seting
The layer will now be all pixely. Thats a part of the plan. Must be done on each layer seperatly.
(The eyes, mouth and nose arn't supose to be pixely, I just did it the fast way on the tutorial)

5. Fur part 2
Now comes the real fur! To get the pixly area to look like fur, you must smudge it. The brush shown on the pic was werry good to use. It's almost at the bottom of the standard brushes (It's further up on mine cause I have allot added to the list)
Now just follow the direction of the fur with the smudge tool. You should use a big smudge brush compared to the image. Don't forget to remove the layer transparecy!!!
If you are affraid to mess it up, copy the layer first. That way, if you fail you'll still have the layer and can try again! I even have a copy of al the shaded layers, the basic color and basicly every step
Try to get al the pixls to blend, but try not to go over the same area to many times or the fur effect will disapare.
If you want the edges to have fuzzy tips on the edges, use a smaler smudge brush with the mode set to lighten and drag some fluff out from the edges.

6. Shadow
This is just a little extra: Shadow!
To make a nice shadow, copy the layer sett with the fuzzy layers (You did put it in a set? Right? It's important to use many sets, named properly!)
Merge the copied layer set. Precerve transparecy on the merged down layer, and paint it all black. To make it look like the shadow of you're char go to Edit/Transform (I think it was Perspective that was the easiest to get the best result)
Drag it to look like a shadow that falls behind the char, in the right direction from the ligt. Make the fill of the layer small (think I used 45%) The Fill is found on the layer guide
Put it behind the char. If the "shadow" shows in the front, erase those parts.

Now al thats missing is a BG, and you're all done!
How to make a BG? Eeerrr.... I just play around with a huge brush til I like it

The finiched pic: [link]

This is my first ever Tutorial. Hope it's helpfull =^_^=

Artwork Copyright © 2005 =The-ShadowCat

Description
Submission by: -- [See Her Gallery]
Full Title: "Fur Tutorial by The-ShadowCat"
Please leave all comments and favorites with the original work [Here]
[Add to Favorites shortcut]

=The-ShadowCat 's Description:
This is a Tutorial on how to make fur in Adobe Photo Shop
Some of these steps are how I like to do it, you might have you're own way to do these. The fur is basicly step 4 and 5
Remember to use many layer sets, named properly, and layers named properly to more easily find you're way among the layers.

~~~

1. Sketch
2. Basic Color
3. Shading
4. Fur part 1
5. Fur part 2
6. Shadow

~~~

1. Sketch
Make the sketch. Personly I like to do it on a paper. (Notice, this sketch was tiny ) Can also be done on the computer

2. Basic Color
The cleanest way to color is with the pencil. With the fur tecnique the edges will be smudged anyway. (I usually use the brush to get fine smudgy edges when I don't make this kind of fur)
Color it with the basic color's, using the paint bucket.

3. Shading
First thing first: make a new empty layer. Use the paint bucket, don't use anti-aliased, use contigious and all layers.
Fill in the uotline and one area with the same color. Erase the lineart that isn't in contact with the area. Have bouth in the same color.
If you do this with al areas, they will overlap a little (since you have the outline on them al) Remember to sort them after who overlaps who! (The overlaping one must be over the other one in the layer order)
Now, with al areas on a seperate layer, the shading can start. This is the easy way: Lock layer transparacy (found on top of the layer guide)
Now you can draw outside the area without painting there!
When I shade I use a huge brush, 17 on flow, airbrush. Then just play around with many shades, use white and black on the extrems, and many shades of the color.
Doing it like that I feel it's almost like the colors melt together.

4. Fur part 1
The shading is done, now comes the FUR!
To make the fur, go to Filter/Noise/Add Noise... I found 20%, Uniform and Monochromatic as a good seting
The layer will now be all pixely. Thats a part of the plan. Must be done on each layer seperatly.
(The eyes, mouth and nose arn't supose to be pixely, I just did it the fast way on the tutorial)

5. Fur part 2
Now comes the real fur! To get the pixly area to look like fur, you must smudge it. The brush shown on the pic was werry good to use. It's almost at the bottom of the standard brushes (It's further up on mine cause I have allot added to the list)
Now just follow the direction of the fur with the smudge tool. You should use a big smudge brush compared to the image. Don't forget to remove the layer transparecy!!!
If you are affraid to mess it up, copy the layer first. That way, if you fail you'll still have the layer and can try again! I even have a copy of al the shaded layers, the basic color and basicly every step
Try to get al the pixls to blend, but try not to go over the same area to many times or the fur effect will disapare.
If you want the edges to have fuzzy tips on the edges, use a smaler smudge brush with the mode set to lighten and drag some fluff out from the edges.

6. Shadow
This is just a little extra: Shadow!
To make a nice shadow, copy the layer sett with the fuzzy layers (You did put it in a set? Right? It's important to use many sets, named properly!)
Merge the copied layer set. Precerve transparecy on the merged down layer, and paint it all black. To make it look like the shadow of you're char go to Edit/Transform (I think it was Perspective that was the easiest to get the best result)
Drag it to look like a shadow that falls behind the char, in the right direction from the ligt. Make the fill of the layer small (think I used 45%) The Fill is found on the layer guide
Put it behind the char. If the "shadow" shows in the front, erase those parts.

Now al thats missing is a BG, and you're all done!
How to make a BG? Eeerrr.... I just play around with a huge brush til I like it

The finiched pic: [link]

This is my first ever Tutorial. Hope it's helpfull =^_^=

Artwork Copyright © 2005 =The-ShadowCat