HOME | DD
HynMayProductions — TRON: Legacy Jacket WIP 2
Published: 2011-01-24 01:33:09 +0000 UTC; Views: 9802; Favourites: 38; Downloads: 245
Redirect to original
Description
This is my second TRON Legacy jacket WIP picture. I just need to add the reflective material to the arms and the top of the hood. The reflective tape that is used is the same stuff that they use on motorcycle jackets. Quite a bit expensive but well worth it. It also makes for a great reflective jacket when riding my scooter at night.
TTYL, HAND-WHM
Related content
Comments: 94
I just need to add the arm stripes and the symbols on top of the hoodie and I'm good to go! 
-WHM
👍: 0 ⏩: 0
great idea, and it's looking pretty good. The disc-mount circle on the back could use some work tho. I'd suggest putting an opaque circle in the middle of it, that would make the inner curve circular, at least.
👍: 0 ⏩: 1
True but I am working with reflective tape that is 1/2" so if makes it really hard to come up with a smooth curve. I was looking at reflective cloth but it's a bit to bulky for my tastes.
-WHM
👍: 0 ⏩: 1
yeah I understand, that's why I suggest using a circular piece of fabric in the middle, mask off the rough edges of the tape.
👍: 0 ⏩: 1
I think that I might use reflective fabric for the circle in the back but use the tape for the rest of it.
-WHM
👍: 0 ⏩: 0
Well, this on is only my prototype but I appreciate it!
-WHM
👍: 0 ⏩: 0
Worth the effort indeed! Looks badass.
👍: 0 ⏩: 1
Thank you very much! I ask this a lot, but how accurate do you think it is on a scale 1-10?
-WHM
👍: 0 ⏩: 1
Absolutely a 10, it looks like an official design
👍: 0 ⏩: 1
Thank you very much! I personally would give it a 9 but it's much appreciated all the same!
-WHM
👍: 0 ⏩: 0
Thank you! How accurate to the movie would you say it is?
-WHM
👍: 0 ⏩: 1
VERY accurate! Especially the circles, those suckers look hard to do
👍: 0 ⏩: 1
Hehe... you have no idea. 
-WHM
👍: 0 ⏩: 0
Thank you very much! Overall, how accurate on a scale 1-10?
-WHM
👍: 0 ⏩: 1
lol its still a WIP right? haha ill give you my rateing when you're completely finished
👍: 0 ⏩: 1
Right now I just need to add the arm stripes and the circles on top of the hood so that it looks somewhat like the helmets.
-WHM
👍: 0 ⏩: 0
Well, I could arrange that... Check your notes.
-WHM
👍: 0 ⏩: 0
Where did you get the ID disk? good remake of the lines they used
👍: 0 ⏩: 1
I got the identity disk from Toys R' Us.
-WHM
👍: 0 ⏩: 1
Well Adidas has Tron jackets. They teamed up with Tron to make a whole apparel line. They're actually quite awesome :3 you should go check 'em out. Hmmm I might have to go buy an ID disk now...
👍: 0 ⏩: 1
I have seen the Adidas jackets but they look nothing like the ones from the movies.
And yes you should! So you can derezz people!
-WHM
👍: 0 ⏩: 1
Lol yea but hey I think they still look pretty awesome. And it's not like company's can just copy them because they are copy-righted.
Yes! Now just to find a Toys-R-Us...
👍: 0 ⏩: 0
Thank you!
-WHM
👍: 0 ⏩: 1
Not yet
I plan to
Is it good?
👍: 0 ⏩: 1
You know how much of a poser you are right now?
It was made back in 1982 so it's before CGI so in that respect it is wonderful!
-WHM
👍: 0 ⏩: 1
You have seen the sequel of TRON yet you haven't seen the original.
-WHM
👍: 0 ⏩: 1
I'M SORRY!
It's taking forever for Netflix to send it over.
IT'S NOT MY FAULT!
👍: 0 ⏩: 1
But shouldn't you have already seen the original years ago before the sequel made it mainstream again?
-WHM
👍: 0 ⏩: 1
How old do u think I am?
👍: 0 ⏩: 1
I'm 19 yet I've seen it. It's a cult classic. Did you watch Disney films when you were a kid?
-WHM
👍: 0 ⏩: 1
Thank you! I'm still not done yet so I hope to have it completed by sometime next week.
👍: 0 ⏩: 1
You're welcome.
It's really cool. Are you planning to wear it at Con-Nichiwa if you go?
👍: 0 ⏩: 1
I am planning on going and if I can finish the pants and shoes in time, I will be going in my TRON Sam Flynn outfit then!
-WHM
👍: 0 ⏩: 1
YAY! That's awesome to hear ^_^ I cant wait to see it. XD
👍: 0 ⏩: 1
Can't wait to finish it.
-WHM
👍: 0 ⏩: 1