HOME | DD
IdentityPolution β UberSaw Tutorial
Published: 2011-09-21 22:27:22 +0000 UTC; Views: 7249; Favourites: 224; Downloads: 129
Redirect to original
Description
so here it is the promised ubersaw tutorial
if you are having trouble with it, have a question on anything, have tips on crafting for me, or whatever feel free ask here.also just realized how messy my basement is in these pictures, please ignore that. also my glue gun obviously takes ALOT of abuse.
Ubersaws created by others with this tutorial:
[link]
Related content
Comments: 84
I recommend using Bondo Putty for the edges. After you apply the putty, wait about 15-30 minutes (it dries really fast, trust me) and take some sandpaper to sand it out. 60 grit sand paper for the rough parts and 100-120 grit to make it smooth and fine. After you feel it's perfect, harden it up with Bondo Fiberglass resin. That takes about 1-2 hour wait time if you want the resin to fully harden up. After, you check to see if you see any mistakes, such as holes or dents and repeat if needed. Finally, you MUST have primer to apply on the product BEFORE you paint it. The primer will not only harden the product, it will give your paint a shinier look.
The materials aren't expensive. Bondo Putty and Fiberglass resin ranges from $5-$15 each and sandpaper is about $5 for 3 large sheets. You don't even need a workshop, but I recommended doing all this outside. Sanding is very messy and the smell of the putty and fiberglass is not healthy to breathe in, especially indoors.
π: 0 β©: 1
Thanks for the tip!
π: 0 β©: 0
Thank you!
π: 0 β©: 0
I'm sorry I only just saw your comment, I'm not on dA a whole lot but great job!
π: 0 β©: 1
Oh you're fine!
Thankyou! x3
π: 0 β©: 0
I'm having trouble with the V part. What do I do exactly?
π: 0 β©: 1
cut the edge at an angle on each side to make the 'sharp' edge of the blade, i hope that helps somehow im more of a visual person and cant explain too well
π: 0 β©: 1
I got it!
I'm re-paiting the blood now, it's to dark
π: 0 β©: 0
Thanks for posting this. It definitely helps prop dummkopfs like me
π: 0 β©: 1
no promblem bro
π: 0 β©: 0
This is very, very helpful for dummkΓΆpfe who didn't know where to start. Vielen dank!
π: 0 β©: 1
no problem comerade~
π: 0 β©: 0
Mien gott!! ZIS IS WONDERFUL~! Danke for tutorial~!
π: 0 β©: 1
three words for this to explain a-maz-ing!
π: 0 β©: 1
danke, dummkopfs~
π: 0 β©: 1
hey im not an idiot!!!! grrrrr...but wour welcome
π: 0 β©: 0
Tell us how to make the Medigun or at least the Soldiers Rocket Launcher
π: 0 β©: 1
the medigun will likely have a tutorial once im done it. i havent got myn together yet but i promise it will be Vunderbar~
π: 0 β©: 1
You are all MAGGOTS!
IDIOT! Get on the point!
YOU DID WELL!
What the hell is your guys problem?!
YEEEEEEEEEEEEEEEEEHAW!!!
MMPH MMMMMPPHH!!!
Stab, stab, stab.
Gentlemen?
Cheers, mate!
π: 0 β©: 0
actually looks like something out of bioshock
π: 0 β©: 1
the vitasaw was actualy based off of the needles from bioshock, but the ubersaw isnt so far off itself
π: 0 β©: 0
by all means~ also id love to see when yuo are done
π: 0 β©: 1
Oh snap, that's amazing and very impressive! <3
π: 0 β©: 1
AWESOME, will you make more tutorials? i think i will make an only cardboard UberSaw when i have it (:U), paper looks like it sucks but if you glue a lot paper on paper (or cardboard on cardboard) you get a woodlike handle
π: 0 β©: 1
its not just paper, its foamcore and its very solid when its done. you can use this same tutorial substituting the foamcore boards for cardboard if you want, im sure it will work just fine. you will however have to use the hotglue smoothed over ALL the edges so you dont see the ugly zigzag cardboard sides. i perfer foamcore because it doeant have those aperent lines that cardboard does throguh the surface, but thats not to say it wouldnt look decent.
π: 0 β©: 1
i can also use thick paper, a guy made a working rifle out of paper and it was like wood, also i can sand the paper to get a nice look
π: 0 β©: 1
go for it, if you can then why not
π: 0 β©: 1
or i could just desing a papercraft of it, the ubersaw is pretty easy to design, it's a simple model :3
π: 0 β©: 1
i never was good with papercraft. though i never realy tried it much either
π: 0 β©: 1
Start from a cube, that's how me and great papercrafters learned!
π: 0 β©: 1
ie done mayn shapes like the basics i just wasnt realy interested in doing it
π: 0 β©: 1
it's boring at first, but when you learn it all, it becomes awesome, also there are TF2 posed like the title models here: [link]
π: 0 β©: 0
Oh man, this is awesome!
I'm gonna have to try and make this later.
Thanks! 8D
π: 0 β©: 1
do it, and show me when u do
π: 0 β©: 1
I'll try, not sure if I know where to get some of the stuff needed though.
π: 0 β©: 1
| Next =>