HOME | DD
lbpfan21 β Hero Factory Moc: Invasion From Below Breez
Published: 2013-11-19 22:09:33 +0000 UTC; Views: 6447; Favourites: 71; Downloads: 0
Redirect to original
Description
Note: roughly based off the Breez minifigure and bag art that is floating around, i know the minifigure has a chain, but i just gave her th 1.0 weapons instead.So, this was just a quick moc i made that's been together for a couple days. i used a glatorian neck to raise the head up, but it was floppy, so i used i rubber band to keep it still... so that's why its there.
Related content
Comments: 46
π: 0 β©: 0
NICE howd you connect the gray shield/armor part with that piece?
π: 0 β©: 2
If we're referring to the back shield, that's most likely from either Brain Attack Stormer or Surge. If it's the chest piece, that's from Bulk 3.0.
π: 0 β©: 0
To be honest, i don't quite remember. This has been taken apart for some time.
π: 0 β©: 1
why doesnt lego make that??? its 100 times better than the mini figs! great job
π: 0 β©: 1
Wow, cool MOC. I especially like the unusual armoring techniques
π: 0 β©: 0
I like it! It looks enough like the minifigure in its build, especially around the legs and torso, but still retains all the necessary poseability for a standard figure.
I really like how the old HF leg armor was included on the leg to make its shape, and the use of those lime-green feet. And the shoulder pads keep the bulk seen on the minifigure armor but don't restrict its movement, which I quite like.
I do wish the hands were the 2.0 versions, I think those would look more accurate to the figure seen in the trailers and be consistent with the previous Breez incarnations, but otherwise I think you've done a great job with this
Will you be doing any other Heroes in this style, by any chance?
π: 0 β©: 1
unfortunately, i only have one silver 2.0/3.0 breast plate piece, so i will not be doing the rest :/
π: 0 β©: 1
Aw darn.
If you were to, you could swap out the green parts for white to create a Stormer version, but some parts (like the feet) aren't available in white..
Ah well.Β
π: 0 β©: 0
how r u able to put 1.0 leg armor? the new hf build system has no technic axles,only technic holes and ball joints.can u show the instructions of the legs,really love the design!
π: 0 β©: 1
the lower legs are hero fsctory 1.0 leg/arm pieces
π: 0 β©: 2
actually you are incorrect, those are not 1.0 hf limbs
π: 0 β©: 1
nope, its a "mata hand", 2.0 bone with ball on one end and socket on the other, the 1.0 armor, a 2.0 small armor and the add on part on the front
π: 0 β©: 1
Although her boots are cool, they really do limit the flexibility.
π: 0 β©: 0
By the way, I figured out how you could use a lego racers tiny turbo tire to straighten that neck instead of that unsightly yellow rubber band. 
π: 0 β©: 0
Thanks, dude! How did you know I was new? lol
π: 0 β©: 1
it says new member right by your name lol. this moc isnt together at the moment, but ya, it does limit flexibility.
π: 0 β©: 0
Hey dude, would It be okay to borrow your design? I plan to create Furno with this format, it's AWESOME.
π: 0 β©: 1
if you can figure it out, go right ahead lol, just give some credit if you post it somewhere. btw, welcome to DA
π: 0 β©: 0
Cool design! I think she would be more accurate to the minifig design if her feet were smaller and she had jets of some kind on the back of her legs. But this is a nice design overall. Great proportions and lots of cool details like the antenna on her right shoulder.
Good work with the pose, too. It's a simple pose that makes it easy to see the details of the character from any angle, but dynamic enough that she looks relaxed rather than standing stiffly upright. I really ought to work on the poses I photograph my MOCs in, as I usually lean too far in one direction or the other and end up having to take twice as many photos β half in stiff, boring poses and half in over-the-top action poses.
π: 0 β©: 1
i did try and add some jets, but they didnt work well, and ya the feet are a bit big, but i was just putting parts together and liked the shaping.
π: 0 β©: 0
That looks impressive. I'm not sure if I'll get any of the IFB sets. But I'll at least get the minifigures off Bricklink once they come up. And some of the new parts look pretty interesting. My favorite of the new parts is the yellow 5-size armor piece from Evo XL Machine and Evo Walker.
π: 0 β©: 0
lol thx Gringat, they are really very easy. i can put a tutorial up if you would like?
π: 0 β©: 1
Nah, I've got 'em worked out. I just love the shaping though. Next chance I get I wanna try them on a char of my own, though of course it'd be tricky to do with anything but lime :I
π: 0 β©: 1
alright...lime or black, im not sure if those feet were made in any other colors other than those.
π: 0 β©: 3
Hi again! I used the design here 
π: 0 β©: 1
Was starting to wonder what you were going to use it for lol, and I gotta say, the moc looks fantastic Gringat! Wonderful Job
π: 0 β©: 1
I thought you used the 1.0 limbs.Β
Explains why I couldn't get the armour to fit at the back, at least. .-.
π: 0 β©: 1
would you like me to make quick instructions now? lol
π: 0 β©: 3
I would like to know just how you built the whole figure. If possible.
π: 0 β©: 0
Nah, I think I understand it now. The hf limb and the hand aren't actually connected, are they? That HF armour piece has a structural role.
π: 0 β©: 1
Correct, they aren't connected. The hand is connected with the socket end facing out. The socket on the bone is slid underneath the other end of the hand and armor is added to the back to keep it there. Then you stick on a foot... the armor on the front of the leg is connected with one peg in the axle spot on the hand and the other peg resting in the little hole in the bone socket
π: 0 β©: 0
actually, if you would have done it theΒ way i did, you wouldn't have been able to add the spikes on the side of the feet
π: 0 β©: 0
a mata foot with a small hf armor connected to it with an exo force robot hand works well to, just the point on the hf armor has to be pointed towards the foot socket
π: 0 β©: 0