HOME | DD

Description
DON'T EXPECT ANY FUTURE UPDATES FOR THIS OR ANY OTHER MODEL SERIES STYLED SPRITES, AS FAR AS I'M CONCERNED, THIS PROJECT IS DEAD, AND STOP TRYING TO GET ME TO ADD NEW VARIANTS TO THE SPRITE SHEET, ITS NOT HAPPENING.

Also these are free to use, just credit us.

Note: ALWAYS REDOWNLOAD THIS WHENEVER AN UPDATE COMES OUT

Note 2: if you see something floating around next to a certain sprite, that means that you can either

A. swap it out for something else
B. add it onto that specific character to make it accurate to a certain season or use it for personal preference
C. use it when your showing the other side of the engine
D. swap it out to have a different character (Bill & Ben's nameplate)

Note 3: you don't have to favorite it again every time an update is released

Note 4: always check the update log

Contains:

Thomas (with S2 and S3-S5 variant)
Edward (with S3 and S4-S5 variant)
Henry (with S1 old shape and new shape, S2 new shape, S3 variant, and Henry's two unfinished willow green repaints in S4 and S5)
Big City Engine (what if)
Gordon (with S3-S5 variant)
Flying Scotsman (what if)
James (with S3-S4 variant with swappable S5 brakepipe position)
Percy (with S3 and S4-S5 variant)
Toby
Duck (with swappable S2 condition steps, S3 variant and S4-S5 variant)
Donald and Douglas (with S3-S5 nameplate position and nameplate-less variant)
Oliver
Diesel
BoCo
Daisy
Bill & Ben
Mavis
City of Truro
Class 40
Stepney
Derek
'Arry & Bert
Skarloey
Rheneas
Sir Handel (with MSR name)
Peter Sam (with funnel variants and MSR name)
Rusty
Duncan
Duke
Bertram (with tank engine variant)
Smudger

Original sprites by

To Do List:
finish the face packs

UPDATE LOG:

5/6/2020: Redid the chassis for Henry and Gordon, fixed issues on every Henry variant

5/7/2020: Added all the Skarloey Railway engines from S4-S5, also added a teaser for potential future additions to the lineup

5/10/2020: Edward and James now share similar tender designs as they did in the model series, Percy also has had some changes made to him, mostly making some parts shorter in length and replacing the brakepipe at the back.

5/18/2020: the S1/S2 blue is now the proper shade of blue, added S3-S5 Thomas and interchangeable S2 whistle for S1/S2 Thomas

5/20/2020: Added S2 Duck, S3 Edward, S3 Gordon, S3 Percy, and Flying Scotsman

5/26/2020: Added another what-if character, the Big City Engine

6/5/2020: changed something on Thomas' chassis

7/3/2020: visible chassis detail on all engines that have them have been updated.

7/4/2020: S3-S5 James after being requested like once or twice (even though there's barely any difference between the two like I've stated before) Also the list has been reshuffled due to the addition of him

7/5/2020: List has been completely reorganized, updated Oliver's faces, SKR/MSR facepack added, added Bill & Ben, and extended the sheet to accommodate more engines

7/15/2020: Safety Valve added to James, added S4-S5 variants for Percy and Duck, and added S4 and S5 variants for Henry

7/16/2020: Edward's number updated, Henry's Splashers in S1/S2 green added for new shape, added Diesel, Mavis, Stepney, Class 40, and Derek

7/18/2020: Added Thomas' steps (seriously, how the hell did I manage to miss that in every other update)

7/22/2020: slightly tweaked Oliver

7/24/2020: Turns out Percy does actually have something different on the other side, so I added that

8/1/2020: So I finally decided that Percy having a different rod color was stupid, so I changed it.

8/13/2020: So, a few more faces have been added, also added the red chassis bit to S1/S2 Thomas

8/15/2020: ok so i'm pretty sure very few people have actually realized you can swap out Thomas' S1 brakepipes and whistle for the S2 variant, so I removed all the extra brakepipes in the left corner and moved Thomas' S2 brakepipes closer to the sprite. Oh and also there's more faces.

8/15/2020: ok so it turns out that the red bit on Thomas' chassis wasn't there until S2, so now that's another thing to add onto the S2 conversion parts

8/16/2020: S2 Thomas and S2 Henry have been turned into their own sprites, D&D's S3-S5 nameplate positions added, S3-S4 James' brakepipe position added, but kept S5 position as an alternative, also there's more faces and even more small tweaks to the sprites

8/19/2020: Just some minor changes and updates, nothing too special, well, unless you consider the removal of gear things and hollowing out S1 Henry's tender steps to be special.

8/19/2020: City of Truro finally added, sprite sheet completely redone and reorganized

8/25/2020: Added Arry & Bert, this finally means that all of the characters that aren't rolling stock or non-rail characters have finally been made.

8/28/2020: replaced Bill & Ben's wheels with properly scaled BR80 wheels and also raised them up to their proper TVS height

8/28/2020: lowered Thomas' rear bufferbeam a tiny bit (had to be done after comparing Thomas' bufferbeam and A&C's bufferbeams with how they were in the episodes)

8/29/2020: more changes to Thomas' bufferbeams

9/3/2020: BoCo's cab roof and bogies have been replaced with updated ones and Daisy's bogies have been replaced with BoCo's new bogies

9/5/2020: Moved Henry's eyes down, updated the colors on the SKR engines (mostly the red on Skarloey and Rheneas + all the engines bufferbeams) redid the coloring on Thomas' buffers, shortened Edward's tender steps, added Edward's safety valve, and updated Edward and James' chassis

9/10/2020: Added all the other red nose face variants that James had plus the other surprised face James had

9/13/2020: Added new facepacks for some of the characters, also finished all of Thomas' faces from S1-S5 (yes, this includes the infamous joke face from S4/TATMR)

10/1/2020: Just a few minor changes to the sprites, mostly just miscolored pixels and stuff like that

10/11/2020: S1/S2 Percy's sandboxes now face inwards like the original model

11/17/2020: Updated S1/S2 and S3 Edward's splasher lining to be more accurate (also we got a S4-S5 variant)

12/22/2020: Updated Thomas' funnel and dome to have the correct thickness

1/14/2021: S3-S5 Thomas now has the correct step size

5/14/2021: Wow, 4 months since the last update, bet it must include some major changes eh? Well, if you consider redoing the bottom half of Henry's tender, redoing part of Thomas, Edward, and James' chassis a tiny bit and even slightly updating the tenders for Flying Scotsman, then yeah I guess this is a major update

5/16/2021: Changed S3 and S4-S5 Percy's steps to be in the correct position, also included Percy's S2 steps as a swappable thing

7/23/2021: Changed Duncan and Stepney's yellow to be more accurate

7/23/2021: I really am regretting ever actually doing this sprite sheet, not like many people actually use these anyways, Sir Handel doesn't have sidetank handrails anymore and Bertram and Smudger both share the same face now

Description
DON'T EXPECT ANY FUTURE UPDATES FOR THIS OR ANY OTHER MODEL SERIES STYLED SPRITES, AS FAR AS I'M CONCERNED, THIS PROJECT IS DEAD, AND STOP TRYING TO GET ME TO ADD NEW VARIANTS TO THE SPRITE SHEET, ITS NOT HAPPENING.

Also these are free to use, just credit us.

Note: ALWAYS REDOWNLOAD THIS WHENEVER AN UPDATE COMES OUT

Note 2: if you see something floating around next to a certain sprite, that means that you can either

A. swap it out for something else
B. add it onto that specific character to make it accurate to a certain season or use it for personal preference
C. use it when your showing the other side of the engine
D. swap it out to have a different character (Bill & Ben's nameplate)

Note 3: you don't have to favorite it again every time an update is released

Note 4: always check the update log

Contains:

Thomas (with S2 and S3-S5 variant)
Edward (with S3 and S4-S5 variant)
Henry (with S1 old shape and new shape, S2 new shape, S3 variant, and Henry's two unfinished willow green repaints in S4 and S5)
Big City Engine (what if)
Gordon (with S3-S5 variant)
Flying Scotsman (what if)
James (with S3-S4 variant with swappable S5 brakepipe position)
Percy (with S3 and S4-S5 variant)
Toby
Duck (with swappable S2 condition steps, S3 variant and S4-S5 variant)
Donald and Douglas (with S3-S5 nameplate position and nameplate-less variant)
Oliver
Diesel
BoCo
Daisy
Bill & Ben
Mavis
City of Truro
Class 40
Stepney
Derek
'Arry & Bert
Skarloey
Rheneas
Sir Handel (with MSR name)
Peter Sam (with funnel variants and MSR name)
Rusty
Duncan
Duke
Bertram (with tank engine variant)
Smudger

Original sprites by

To Do List:
finish the face packs

UPDATE LOG:

5/6/2020: Redid the chassis for Henry and Gordon, fixed issues on every Henry variant

5/7/2020: Added all the Skarloey Railway engines from S4-S5, also added a teaser for potential future additions to the lineup

5/10/2020: Edward and James now share similar tender designs as they did in the model series, Percy also has had some changes made to him, mostly making some parts shorter in length and replacing the brakepipe at the back.

5/18/2020: the S1/S2 blue is now the proper shade of blue, added S3-S5 Thomas and interchangeable S2 whistle for S1/S2 Thomas

5/20/2020: Added S2 Duck, S3 Edward, S3 Gordon, S3 Percy, and Flying Scotsman

5/26/2020: Added another what-if character, the Big City Engine

6/5/2020: changed something on Thomas' chassis

7/3/2020: visible chassis detail on all engines that have them have been updated.

7/4/2020: S3-S5 James after being requested like once or twice (even though there's barely any difference between the two like I've stated before) Also the list has been reshuffled due to the addition of him

7/5/2020: List has been completely reorganized, updated Oliver's faces, SKR/MSR facepack added, added Bill & Ben, and extended the sheet to accommodate more engines

7/15/2020: Safety Valve added to James, added S4-S5 variants for Percy and Duck, and added S4 and S5 variants for Henry

7/16/2020: Edward's number updated, Henry's Splashers in S1/S2 green added for new shape, added Diesel, Mavis, Stepney, Class 40, and Derek

7/18/2020: Added Thomas' steps (seriously, how the hell did I manage to miss that in every other update)

7/22/2020: slightly tweaked Oliver

7/24/2020: Turns out Percy does actually have something different on the other side, so I added that

8/1/2020: So I finally decided that Percy having a different rod color was stupid, so I changed it.

8/13/2020: So, a few more faces have been added, also added the red chassis bit to S1/S2 Thomas

8/15/2020: ok so i'm pretty sure very few people have actually realized you can swap out Thomas' S1 brakepipes and whistle for the S2 variant, so I removed all the extra brakepipes in the left corner and moved Thomas' S2 brakepipes closer to the sprite. Oh and also there's more faces.

8/15/2020: ok so it turns out that the red bit on Thomas' chassis wasn't there until S2, so now that's another thing to add onto the S2 conversion parts

8/16/2020: S2 Thomas and S2 Henry have been turned into their own sprites, D&D's S3-S5 nameplate positions added, S3-S4 James' brakepipe position added, but kept S5 position as an alternative, also there's more faces and even more small tweaks to the sprites

8/19/2020: Just some minor changes and updates, nothing too special, well, unless you consider the removal of gear things and hollowing out S1 Henry's tender steps to be special.

8/19/2020: City of Truro finally added, sprite sheet completely redone and reorganized

8/25/2020: Added Arry & Bert, this finally means that all of the characters that aren't rolling stock or non-rail characters have finally been made.

8/28/2020: replaced Bill & Ben's wheels with properly scaled BR80 wheels and also raised them up to their proper TVS height

8/28/2020: lowered Thomas' rear bufferbeam a tiny bit (had to be done after comparing Thomas' bufferbeam and A&C's bufferbeams with how they were in the episodes)

8/29/2020: more changes to Thomas' bufferbeams

9/3/2020: BoCo's cab roof and bogies have been replaced with updated ones and Daisy's bogies have been replaced with BoCo's new bogies

9/5/2020: Moved Henry's eyes down, updated the colors on the SKR engines (mostly the red on Skarloey and Rheneas + all the engines bufferbeams) redid the coloring on Thomas' buffers, shortened Edward's tender steps, added Edward's safety valve, and updated Edward and James' chassis

9/10/2020: Added all the other red nose face variants that James had plus the other surprised face James had

9/13/2020: Added new facepacks for some of the characters, also finished all of Thomas' faces from S1-S5 (yes, this includes the infamous joke face from S4/TATMR)

10/1/2020: Just a few minor changes to the sprites, mostly just miscolored pixels and stuff like that

10/11/2020: S1/S2 Percy's sandboxes now face inwards like the original model

11/17/2020: Updated S1/S2 and S3 Edward's splasher lining to be more accurate (also we got a S4-S5 variant)

12/22/2020: Updated Thomas' funnel and dome to have the correct thickness

1/14/2021: S3-S5 Thomas now has the correct step size

5/14/2021: Wow, 4 months since the last update, bet it must include some major changes eh? Well, if you consider redoing the bottom half of Henry's tender, redoing part of Thomas, Edward, and James' chassis a tiny bit and even slightly updating the tenders for Flying Scotsman, then yeah I guess this is a major update

5/16/2021: Changed S3 and S4-S5 Percy's steps to be in the correct position, also included Percy's S2 steps as a swappable thing

7/23/2021: Changed Duncan and Stepney's yellow to be more accurate

7/23/2021: I really am regretting ever actually doing this sprite sheet, not like many people actually use these anyways, Sir Handel doesn't have sidetank handrails anymore and Bertram and Smudger both share the same face now