HOME | DD
NewDivide1701 — A wee problem, sir, really. Just temporary.
#star #startrek #trek
Published: 2017-07-01 02:21:10 +0000 UTC; Views: 921; Favourites: 15; Downloads: 112
Redirect to original
Description
With the problems on trekmeshes.ch, I'm going to try submitting Not JJ's Enterprise here and hope for the best.HOLY CRAP!!! IT WORKED!!
Anywho, the ship is divided up into several meshes to maximize clarity during the conversion process from an outdated AutoCAD 2002 to 3DS format.
-Port Nacelle
-Starboard Nacelle
-Engineering
-Deflector
-Neck
-Several saucer meshes
-3 different bridges.
The Abrams bridge is the one I use, it has the forward view port where the bridge dome is actually a high resolution sensor array.
The Ready Room replaces the bridge viewport with 2 viewports and they become the Captain's ready room.
The Pike Bridge is the traditional bridge with a dome on top with a low resolution bridge mockup so you can see inside. And that bridge can be replaced with a more familiar bridge that is found on trekmeshes.ch and just rotate it 36 degrees to port, or 36 degrees counterclockwise.
Puffinstudio tested the mesh, and it works on his system. So hopefully that means it will work with most systems. Fingers crossed.
Related content
Comments: 8
Much Better than JJ's. Wish they would have used this or something like Pikes Enterprise in Discovery! JMHO...
👍: 0 ⏩: 0
I'm on my smartphone right now and there is a rectangle with the word DOWNLOAD, ZIP download 5.2 MB.
Just push and it should download.
On a standard desktop it should be around the right or top right. But yeah look for ZIP 5.2 MB.
👍: 0 ⏩: 0
There is a download button on the screen. Click it and a 5.3MB zip file should start downloading.
👍: 0 ⏩: 0
Better give it a test run first. It worked on Puffinstudio's program, as you can tell.
👍: 0 ⏩: 1
i don't really have a 3d program on my computer
👍: 0 ⏩: 1
That would be a requirement.
👍: 0 ⏩: 0