HOME | DD

Description

I'm going a little experiment of converting the DWG mesh into DXF format, only without the material that's normally found on it. Meaning no NCC-1701 for the Enterprise.

www.deviantart.com/newdivide17…

And of course:

paypal.me/pools/c/8ffqpAniBb

Still looking for a job in Nova Scotia, trying to figure out Society6 since Zazzle only raked in $17 in the last 3 years, and don't know how Patreon works and slightly leery even though many artists have been successful on it. But then again my employment insurance is already active, so there's time. But then again Stephen Harper was ousted out years ago, and he was Canada's version of Trump -- he's just more charismatic and more skillful in fooling the people even though he was caught red handed numerous times in political corruption and high treason like Trump has been.

Anyways, one thing I noticed about the bridge is with some modifications, the TOS bridge minus the screen and the 2 forward substations can fit into the bow of deck 2 where the viewport is, and in theory should squeeze into a major structural support system before where the bridge would normally curve downwards. Thereby not getting in the way of the upper high resolution sensor array.

The catch is the turbolift would actually be an egress into the main corridor, and that might be a bit snug. And there might be some reshuffling for the DSC Enterprise bridge to fit there especially since the viewscreen might be too big for the mesh.

Oh, the ZIP file also has the "Pike" bridge where you pan down like on the Cage. Plus the ready room bridge where the bridge is in the centre, and the Captain's ready room is on the bow with the 2 viewports to match up with the 2 holes on the TOS Enterprise. The TAS episode, "One Of Our Planets Is Missing," canonized that as phasers, but with phasers already on deck 4 there, ready room.

The Abrams bridge as shown here is already attached to the main DXF mesh.

Edit: I'm sick and tired of having to edit my images so they can be seen in full view instead of having to edit them everytime I submit. And sick and tired of not being able to submit meshes here. Being forced to submit them to Jumpshare and then going to see about submitting them to Trekmeshes.ch as soon as possible.

Description

I'm going a little experiment of converting the DWG mesh into DXF format, only without the material that's normally found on it. Meaning no NCC-1701 for the Enterprise.

www.deviantart.com/newdivide17…

And of course:

paypal.me/pools/c/8ffqpAniBb

Still looking for a job in Nova Scotia, trying to figure out Society6 since Zazzle only raked in $17 in the last 3 years, and don't know how Patreon works and slightly leery even though many artists have been successful on it. But then again my employment insurance is already active, so there's time. But then again Stephen Harper was ousted out years ago, and he was Canada's version of Trump -- he's just more charismatic and more skillful in fooling the people even though he was caught red handed numerous times in political corruption and high treason like Trump has been.

Anyways, one thing I noticed about the bridge is with some modifications, the TOS bridge minus the screen and the 2 forward substations can fit into the bow of deck 2 where the viewport is, and in theory should squeeze into a major structural support system before where the bridge would normally curve downwards. Thereby not getting in the way of the upper high resolution sensor array.

The catch is the turbolift would actually be an egress into the main corridor, and that might be a bit snug. And there might be some reshuffling for the DSC Enterprise bridge to fit there especially since the viewscreen might be too big for the mesh.

Oh, the ZIP file also has the "Pike" bridge where you pan down like on the Cage. Plus the ready room bridge where the bridge is in the centre, and the Captain's ready room is on the bow with the 2 viewports to match up with the 2 holes on the TOS Enterprise. The TAS episode, "One Of Our Planets Is Missing," canonized that as phasers, but with phasers already on deck 4 there, ready room.

The Abrams bridge as shown here is already attached to the main DXF mesh.

Edit: I'm sick and tired of having to edit my images so they can be seen in full view instead of having to edit them everytime I submit. And sick and tired of not being able to submit meshes here. Being forced to submit them to Jumpshare and then going to see about submitting them to Trekmeshes.ch as soon as possible.