HOME | DD

Description
if you use this pattern, then I would love to see what you come up with.

INSTRUCTIONS
1. Cut 2 of each pieces 1 through 6, cut 4 of piece 7
2. Sew pieces #1 together matching red dots.
3. Sew pieces #2 to pieces #1 matching pink dots.
4. Sew pieces #3 to pieces #2 matching blue dots.
5. Sew pieces #4 to pieces #3 matching green dots.
6. Sew pieces #5 to pieces #4 matching yellow dots.
7. Sew pieces #6 to pieces #5 matching orange dots.
8. Take 2 #7 pieces and sew together at center back seam (the edge with no dot in the top corner.)
9. Fold pieces right side out and press. Repeat for the other #7 pieces.
10. Stitch the raw edges of the #7 pieces together.
11. Sew pieces #7 to pieces #6 matching the purple dots.
12. Sew single fold bias tape over all of the seams on the wrong side of the garment.
13. If you are going to be using boning in the neck corset, use featherlight plastic boning and insert the pieces of boning into the casing created by the bias tape.
14. Bind the top and bottom edges of the garment with bias tape.
15. On the center back seam insert grommets spaced 1 inch apart.
16. Put lacing through the grommets.
17. Enjoy your new neck corset 

[link] link to what the finished product will look like (the red and black one)

My tutorial for creating a custom neck corset pattern can be found here. [link] or here [link]

Description
if you use this pattern, then I would love to see what you come up with.

INSTRUCTIONS
1. Cut 2 of each pieces 1 through 6, cut 4 of piece 7
2. Sew pieces #1 together matching red dots.
3. Sew pieces #2 to pieces #1 matching pink dots.
4. Sew pieces #3 to pieces #2 matching blue dots.
5. Sew pieces #4 to pieces #3 matching green dots.
6. Sew pieces #5 to pieces #4 matching yellow dots.
7. Sew pieces #6 to pieces #5 matching orange dots.
8. Take 2 #7 pieces and sew together at center back seam (the edge with no dot in the top corner.)
9. Fold pieces right side out and press. Repeat for the other #7 pieces.
10. Stitch the raw edges of the #7 pieces together.
11. Sew pieces #7 to pieces #6 matching the purple dots.
12. Sew single fold bias tape over all of the seams on the wrong side of the garment.
13. If you are going to be using boning in the neck corset, use featherlight plastic boning and insert the pieces of boning into the casing created by the bias tape.
14. Bind the top and bottom edges of the garment with bias tape.
15. On the center back seam insert grommets spaced 1 inch apart.
16. Put lacing through the grommets.
17. Enjoy your new neck corset 

[link] link to what the finished product will look like (the red and black one)

My tutorial for creating a custom neck corset pattern can be found here. [link] or here [link]