HOME | DD
RoboLoco2 — ''Lead Fury'' Sub Machine Gun
Published: 2012-02-25 16:31:08 +0000 UTC; Views: 175; Favourites: 0; Downloads: 0
Redirect to original
Description
Later.Related content
Comments: 9
Looks like you just put some scraps onto it. No flow, just made a simple gun then hubbled together a weird magazine and some weird thing on the bottom. 4/10 I hate to that that I don't like it. BUT, I don't.
👍: 0 ⏩: 1
The piece at the bottom is a handguard, mainly built for weird people.
👍: 0 ⏩: 0
Looks a LOT like the fn f2000. It's a good piece, only I'd recommend checking your irons next time. The magazine obscures the line of view from the rear sight/carrying handle, and even if it didn't, the foresight is too low. By the way, I see that the rear sight is an m4/m16 style carrying handle. Looks to be the standard weaver mounted model. Those are usually a bit longer. The one I have for my AR (guess without looking) is about eight inches or so. Perhaps a touch less.
👍: 0 ⏩: 1
Alright, time to point out YOUR flaws.
Sights are on the side
Built with the FN2000 receiver and using FN 5.7×28mm cartridge.
The rear sight is supposed to be higher because you look down towards it, lining them up.
and now I'm done.
👍: 0 ⏩: 1
Then the problem is poor perspective. Also, the sights should ALWAYS align.
👍: 0 ⏩: 1
The front of the rear sight aligns with the front sight perfectly, in order to look through the rear sight, you have to look downwards to look through the sight completely.
👍: 0 ⏩: 2
Have you ever used this style of rear sight? The back end is where the actual sight piece is located. That's what the adjuster block is for. That's the end you need to line up with the foresight.
👍: 0 ⏩: 0
Use Bren skills, Robo.
Both sights on the side, the front sight has crosshairs.
👍: 0 ⏩: 0