HOME | DD

TDBK — Jack The Ripper -MECH- prog

Published: 2006-03-06 22:16:51 +0000 UTC; Views: 4232; Favourites: 47; Downloads: 365
Redirect to original
Description Hello everyone. It's been a while!

Here is the progression of my new mech Jack The Ripper. Really, it's just "The Ripper" but "Jack" is it's model name. It's just one of a few versions of this mech that I will make. I drew a picture of this a couple of weeks ago. (I would share the original drawing with you but I do not have a working scanner). I started with the arms and I did not save as many steps as I would have liked. So you'll see some pretty major jumps in progression here and there. It looks about 98% like the drawing except I had to change the placement of the guns on the model. I did this model yesterday.. and I have not had time to add some more things. I still need to cut out the cockpit and put in a control center for the pilot. Hopefully I'll get to that some day soon.

Related content

TDBK - SCR-112 SCARAB -final-

TDBK - 413 DPH - Doppelhund

TDBK - DB810-MV-K Hellfyre MS

TDBK - Jack The Ripper RE-VISIT

TDBK - Flagstaff Medium Hover-Tank

TDBK - 1-AA

TDBK - ACL-911 ARCANGEL SA

TDBK - TZ41-TYR -RMSV-

TDBK - ATU-ATREUS 9090 Mech -WIP-

Ryuyujin - Sharks in the Water

SuprDave25 - Glorious 13 madd maxx custom

Jetfreak-7 - Straight Shooters

zanfartsui - Warhammer 40K, Nightstalker Weapon Design

PortRoyalEquines - Warmblood Portrait Base

pbwells - Shattered [🤖]

GabiMedia - Midnight Arrival: A Journey Through Smoke and S [🤖]

brynls - Stuff I

NoodleArt - ge

Jaro313 - grasshopper

Sryth007 - Medium 'Mech Final

Rancemeister - The Lucifyre... (a bit more)...

Kanthesis - Concept Mecha WIP II

BishopSteiner - Motr24: Stone's Folly

IonfluxDA - Mech

LMorse - UN 1244 sculpt

screenscan - san andreas SAN01C shaded
Comments: 165

TDBK In reply to ??? [2006-03-10 21:26:24 +0000 UTC]

Thank you very much!!!





👍: 0 ⏩: 0

Naruto-De In reply to ??? [2006-03-07 06:39:46 +0000 UTC]

W()()T!! L33t!! hehehehe Im likin it man! (on another note Im full steam ahead on my Ed-209 again ) [link]

Im still keen on surfacing on of your bad boys in the near future too

👍: 0 ⏩: 1

TDBK In reply to Naruto-De [2006-03-10 21:28:11 +0000 UTC]

Thanks man! Sounds good! I'll have something for you in the future! Off to check out your ED209!

👍: 0 ⏩: 0

Deamon007 In reply to ??? [2006-03-07 05:54:16 +0000 UTC]

wow that's completely awesome

👍: 0 ⏩: 1

TDBK In reply to Deamon007 [2006-03-10 21:30:44 +0000 UTC]

Thank you man!!

👍: 0 ⏩: 0

maximusvein In reply to ??? [2006-03-07 04:47:50 +0000 UTC]

woow, great stuff u hav der, i thought it was a sketch, did u do that on pc by hand? great!

👍: 0 ⏩: 1

TDBK In reply to maximusvein [2006-03-10 21:37:18 +0000 UTC]

Hi! It's done in 3d. I used wings3d actually. It's free if you want to try it --> [link]

👍: 0 ⏩: 1

maximusvein In reply to TDBK [2006-03-13 04:39:44 +0000 UTC]

hey, thnks for the link, ill gonna try it out now.

👍: 0 ⏩: 0

blackswordsman28 In reply to ??? [2006-03-07 04:33:05 +0000 UTC]

Dude! That is most Boss!

👍: 0 ⏩: 1

TDBK In reply to blackswordsman28 [2006-03-10 21:39:16 +0000 UTC]

Hey!! Thank you very much bro! I appreciate the comment!

👍: 0 ⏩: 0

Echoscout In reply to ??? [2006-03-07 04:32:51 +0000 UTC]

kick-ass!

👍: 0 ⏩: 1

TDBK In reply to Echoscout [2006-03-10 21:40:30 +0000 UTC]

Hello hello!! Thanks for checking it out!!


👍: 0 ⏩: 1

Echoscout In reply to TDBK [2006-03-11 00:29:58 +0000 UTC]

no problem

👍: 0 ⏩: 0

Legato895 In reply to ??? [2006-03-07 03:03:52 +0000 UTC]

very nice!!! you are starting to use the triangular extrusion more sparingly, and investing more thoughtful details, and the results are VERY noticeable!

👍: 0 ⏩: 1

TDBK In reply to Legato895 [2006-03-10 21:50:25 +0000 UTC]

Hey thanks man!! Hell I have to stop myself from extruding everything!! haha! I am an extrude whore!! I go into a trance when I do mechs and want to extrude until the cows come home!! I guess it's a good thing I dont do it in my professional work. haha!

👍: 0 ⏩: 0

Leviamicky In reply to ??? [2006-03-07 02:34:35 +0000 UTC]

Truly awesome work buddy!!!

👍: 0 ⏩: 1

TDBK In reply to Leviamicky [2006-03-07 02:42:56 +0000 UTC]

Hey! Good to hear from you man. Glad you like it!

👍: 0 ⏩: 0

Kritter5x In reply to ??? [2006-03-07 02:19:18 +0000 UTC]

Geez, that's amazing. I really have NO idea how you can do this. ^^

👍: 0 ⏩: 1

TDBK In reply to Kritter5x [2006-03-07 02:42:11 +0000 UTC]

Thank you! Well it's not too hard really. Most of all I love making mechs and it's fun so that helps.

👍: 0 ⏩: 0

masakari-prime In reply to ??? [2006-03-07 01:46:57 +0000 UTC]

Very cool Mech, really like this design. Reminds me of one of my faves, the Sha Yu, however it has it's own distinct look

👍: 0 ⏩: 1

TDBK In reply to masakari-prime [2006-03-07 02:04:15 +0000 UTC]

Thanks man! Yeah, I like the Sha Yu design myself. I may have got a hint here and there from that and the timber wolf.

👍: 0 ⏩: 0

PearlPhoenix In reply to ??? [2006-03-07 00:50:00 +0000 UTC]

holy CRAP dude that is so SWEEEET!

👍: 0 ⏩: 1

TDBK In reply to PearlPhoenix [2006-03-07 02:02:29 +0000 UTC]

Hello Pearl!! Thank you. Haha.. I was thinking after you siad sweet.. "I wonder if I could make a popsicle like this??" Then I thought.. "Nahh.. it would be like razor blades and sharp pains in the mouth are not fun."

👍: 0 ⏩: 1

PearlPhoenix In reply to TDBK [2006-03-07 02:18:40 +0000 UTC]

ROFL

haha make a black one with red stripes? mauhahahaa

👍: 0 ⏩: 1

TDBK In reply to PearlPhoenix [2006-03-07 02:37:04 +0000 UTC]

You must read minds! I was thinking black and red after viewing --> [link]

👍: 0 ⏩: 1

PearlPhoenix In reply to TDBK [2006-03-07 05:08:24 +0000 UTC]

RAWR !

👍: 0 ⏩: 1

TDBK In reply to PearlPhoenix [2006-03-10 21:36:11 +0000 UTC]

Haha!!

👍: 0 ⏩: 0

Councilor In reply to ??? [2006-03-07 00:45:24 +0000 UTC]

Nice mech! ... and welcome back!

👍: 0 ⏩: 1

TDBK In reply to Councilor [2006-03-07 01:59:03 +0000 UTC]

Thank you man! Good to hear from you!

👍: 0 ⏩: 0

Aiyon In reply to ??? [2006-03-07 00:44:12 +0000 UTC]

Hmph. Going to be another great design, i see. ^^

👍: 0 ⏩: 1

TDBK In reply to Aiyon [2006-03-07 01:58:01 +0000 UTC]

Well, I guess.. haha! Thank you very much!

👍: 0 ⏩: 0

DeverelDraws In reply to ??? [2006-03-07 00:38:34 +0000 UTC]

It's been ages since you uploaded something!
Welcome back
I like this design too...you're very thourough

👍: 0 ⏩: 1

TDBK In reply to DeverelDraws [2006-03-07 01:53:03 +0000 UTC]

Hello! Thank you.. Nice to hear from you!

👍: 0 ⏩: 0

zenadorion In reply to ??? [2006-03-07 00:24:20 +0000 UTC]

Hi dude, yeah it has been a while. Welcome back.

About Jack the Reaper, very detailed as always. Great stuff!!

👍: 0 ⏩: 1

TDBK In reply to zenadorion [2006-03-07 01:49:27 +0000 UTC]

Hey good to hear from you man! Thanks for stopping by!

👍: 0 ⏩: 1

zenadorion In reply to TDBK [2006-03-07 05:31:16 +0000 UTC]

Well, yeah... it's really good to be back

👍: 0 ⏩: 1

TDBK In reply to zenadorion [2006-03-10 21:33:50 +0000 UTC]

👍: 0 ⏩: 0

boznic In reply to ??? [2006-03-07 00:11:11 +0000 UTC]

fucking awesome!!. I love all the surfaces.

👍: 0 ⏩: 1

TDBK In reply to boznic [2006-03-07 01:46:04 +0000 UTC]

Thank you very much man! Glad you stopped by!

👍: 0 ⏩: 0

Prime-Mover [2006-03-07 00:04:19 +0000 UTC]

This rocks. It absolutely rocks. Excellent design, but is there a colored one following for me to fav?

👍: 0 ⏩: 1

TDBK In reply to Prime-Mover [2006-03-07 01:45:11 +0000 UTC]

Thank you man! I will be making a UV texture for this.. After I make a working cockpit.

👍: 0 ⏩: 0

Formor [2006-03-06 23:40:39 +0000 UTC]

Great dsign here!

👍: 0 ⏩: 1

TDBK In reply to Formor [2006-03-07 01:43:07 +0000 UTC]

Thank you very much!

👍: 0 ⏩: 0

Hapax-Legomenon In reply to ??? [2006-03-06 23:20:36 +0000 UTC]

The fact that you have modelled this in wings, inspires me that what I want to do, can be done.
It just may not be done by me... yet.

👍: 0 ⏩: 1

TDBK In reply to Hapax-Legomenon [2006-03-07 01:41:21 +0000 UTC]

Oh you can do it! :HINT: I suggest working in the advanced mode in wings. It actually makes it easier then the default mode. Go to (EDIT) (PREFERENCES) (ADVANCED) [CHECK MARK (ADVANCED MENUS)]

👍: 0 ⏩: 1

Hapax-Legomenon In reply to TDBK [2006-03-08 12:09:02 +0000 UTC]

Cheers, will do.
If you have any more hints and tips for Wings, I shall welcome them with open eyes.

👍: 0 ⏩: 1

TDBK In reply to Hapax-Legomenon [2006-03-10 22:26:30 +0000 UTC]

One can learn a lot of cool little tricks here --> [link]

👍: 0 ⏩: 1

Hapax-Legomenon In reply to TDBK [2006-03-11 17:52:49 +0000 UTC]

Fantastic. Thanks for the link

👍: 0 ⏩: 1

TDBK In reply to Hapax-Legomenon [2006-03-13 19:21:09 +0000 UTC]

👍: 0 ⏩: 0

Mr-KaMiKaZe In reply to ??? [2006-03-06 22:59:03 +0000 UTC]

Damn i Love This mech and Wellcomn back, the is good to see your work again
May i ask how many poligons this have??
sorry for my bad enlish

👍: 0 ⏩: 1


<= Prev | | Next =>