HOME | DD

Description
-These are REPLICA Airsoft firearms-
All pictures were taken following all safety precautions

This is a pretty old picture, and I only had a tripod-mounted point-and-shoot camera at my disposal that didn't have a particularly great sensor.

This is the same gun from my other picture with the red backdrop. I experimented with putting a collapsible M4 butt stock on my MP5, and this is as far as I got. I never actually used it in this configuration, as the entire buffer tube/butt stock assembly was held on by 1 screw.

Note that I also had the arms of the traditional collapsing MP5 butt stock cut off and pressed into the rails found on the sides of the body as "reinforcement rails" similar to the ones welded to the sides of the PSG1 receiver (if you compare the PSG1 to a "regular" G3, the PSG1 cannot accept a traditional HK sliding stock, not that you would ever need one on a dedicated DMR/Sniper rifle).

With the exception of the vest and helmet, the gear in the picture is authentic, and includes an Eagle Industries dump pouch, Alta Industries knee pads, Hatch BOSS goggles, and a Safariland 6004 holster for a Mk23.

Description
-These are REPLICA Airsoft firearms-
All pictures were taken following all safety precautions

This is a pretty old picture, and I only had a tripod-mounted point-and-shoot camera at my disposal that didn't have a particularly great sensor.

This is the same gun from my other picture with the red backdrop. I experimented with putting a collapsible M4 butt stock on my MP5, and this is as far as I got. I never actually used it in this configuration, as the entire buffer tube/butt stock assembly was held on by 1 screw.

Note that I also had the arms of the traditional collapsing MP5 butt stock cut off and pressed into the rails found on the sides of the body as "reinforcement rails" similar to the ones welded to the sides of the PSG1 receiver (if you compare the PSG1 to a "regular" G3, the PSG1 cannot accept a traditional HK sliding stock, not that you would ever need one on a dedicated DMR/Sniper rifle).

With the exception of the vest and helmet, the gear in the picture is authentic, and includes an Eagle Industries dump pouch, Alta Industries knee pads, Hatch BOSS goggles, and a Safariland 6004 holster for a Mk23.