HOME | DD

Description

... the main hangar! The TIE fighters enter the hangar from the starboard side through the single hangar bay, which is 20 meters wide and about 10 meters high. It is not designed to launch the common TIE starfighters, however it also has room for two TIE shuttles or a single small shuttlecraft up to 18 meters long and 9 meters wide (it has to exit the hangar sideways and fly parallel to the ship during the launch procedure).

----------------------------------------------------------------------

The TIE fighters I used for this render for demonstration purposes are available on sketchfab, provided by the user Daniel under the Creative Commons - Attribution license: creativecommons.org/licenses/b…

The model: sketchfab.com/3d-models/star-w…
user page: sketchfab.com/DanielAndersson

EDIT: had to re-upload the file because some of the meshes were missing while others which are actually just for measurement purposes were rendered.

Description

... the main hangar! The TIE fighters enter the hangar from the starboard side through the single hangar bay, which is 20 meters wide and about 10 meters high. It is not designed to launch the common TIE starfighters, however it also has room for two TIE shuttles or a single small shuttlecraft up to 18 meters long and 9 meters wide (it has to exit the hangar sideways and fly parallel to the ship during the launch procedure).

----------------------------------------------------------------------

The TIE fighters I used for this render for demonstration purposes are available on sketchfab, provided by the user Daniel under the Creative Commons - Attribution license: creativecommons.org/licenses/b…

The model: sketchfab.com/3d-models/star-w…
user page: sketchfab.com/DanielAndersson

EDIT: had to re-upload the file because some of the meshes were missing while others which are actually just for measurement purposes were rendered.