HOME | DD

Description

These models were obtained from the recent Nintendo Gigaleak. Some of them have been upgraded with textures or more details, such as cockpit interiors for the Arwings. The Mirage Dragon, Arwings, and Kamantis will require more than just paper, glue and scissors. For the Arwings, you'll want twisty ties or some sort of long thin stick to attach the G-Diffusers and wings to the body, cut the corners off of those parts when you're assembling them, run the twisty tie through the hole, glue it in, and then cut the corner off of the body in the area it attaches to and glue it on that end.

For the Mirage Dragon, you're going to need a thick, long cord at least 14 inches in length, I recommend using one from a broken headset. on the end of each segment and the head, cut an X shaped hole with a scalpel or knife, run the narrow end of the cord through the hole at the bakc of the head and jam the headphone plug into the jaw of the dragon so it gets stuck and can't come out. Then run all of the other segments into the cord in the same manner.

For Kamantis, you'll need both Pipe Cleaners AND twisty tied. The pipe cleaners are used to make the arms and legs, and the twisty ties are used to connect the thighs and body segments.

Description

These models were obtained from the recent Nintendo Gigaleak. Some of them have been upgraded with textures or more details, such as cockpit interiors for the Arwings. The Mirage Dragon, Arwings, and Kamantis will require more than just paper, glue and scissors. For the Arwings, you'll want twisty ties or some sort of long thin stick to attach the G-Diffusers and wings to the body, cut the corners off of those parts when you're assembling them, run the twisty tie through the hole, glue it in, and then cut the corner off of the body in the area it attaches to and glue it on that end.

For the Mirage Dragon, you're going to need a thick, long cord at least 14 inches in length, I recommend using one from a broken headset. on the end of each segment and the head, cut an X shaped hole with a scalpel or knife, run the narrow end of the cord through the hole at the bakc of the head and jam the headphone plug into the jaw of the dragon so it gets stuck and can't come out. Then run all of the other segments into the cord in the same manner.

For Kamantis, you'll need both Pipe Cleaners AND twisty tied. The pipe cleaners are used to make the arms and legs, and the twisty ties are used to connect the thighs and body segments.