HOME | DD

Destro2k โ€” Exteel Side Winder - a

Published: 2010-07-25 13:44:31 +0000 UTC; Views: 42568; Favourites: 227; Downloads: 6876
Redirect to original
Description well, honestly, i don't know what i should write
maybe i didn't realized that i'm finally done with this model.

it takes a horrible long time to build and sometimes i was about to give up, but after more than two month (effective building time) i can share this pictures with you

Fazit:
the best decision was, to print the sheets on A3, because this model takes me to the limits and you should have a little bit more experience for this.
the most parts are quite easy, but some pieces are hard as hell.
you can see it in the "building process gallery"

specially the backpack was that part, that gives me more then one headache

but it was a challenge that I gladly accepted
because this model is really unique and definitely an eyecatcher in every shelf ore something else.

the guys from "Just Paper" did a great job on this and if they ever decide to create an other one, i would build it too


IMPORTANT!!
permission for upload given through NCsoft
pls read this journal entry for more infos

the sheets are free and should remain so
pls download and use them only for personal use
otherwise i must remove them

Exteel & Sidewinder are trademarks & copyrights by NCsoft
Model created by Just Paper


to download the sheets
just click on download above

-other shots-
Related content
Comments: 238

NinongRon [2021-11-16 15:12:17 +0000 UTC]

๐Ÿ‘: 0 โฉ: 0

tonygrafx [2013-06-07 08:26:36 +0000 UTC]

Overall

Vision

Originality

Technique

Impact


the workmanship of the finished model rivals that of the best pla models I've had the privilege to build in my youthful past. The colors are well chosen, highlighting the sleekness and intimidating nature of the design. I'm assuming that articulation is limited, (if I'm wrong, please forgive!) which is a shame; posability would add to the model's general appeal. One question; is the rear stand really needed? With your permission I'm going to try to use reinforcement to the legs in hopes of doing away with the stand completely. I also like the fact that you chose to pose the hands in a relaxed, open position. Fists are easier to fold, and the open position allows the model makers to slightly alter the position of the fingers, if they care to.

๐Ÿ‘: 0 โฉ: 0

cachulo29 [2015-11-18 14:11:37 +0000 UTC]

Scale? plz....

๐Ÿ‘: 0 โฉ: 0

cachulo29 [2015-11-18 14:11:17 +0000 UTC]

Scale?

๐Ÿ‘: 0 โฉ: 0

GameScanner [2015-04-04 21:25:14 +0000 UTC]

2 month build time? Geez. I'd like to tackle it, but build time scares me a bit :/ Excellent work btw.!

๐Ÿ‘: 0 โฉ: 0

xenon312 [2015-01-06 11:37:16 +0000 UTC]

Thack you.

๐Ÿ‘: 0 โฉ: 0

mhc916 [2014-08-04 15:57:53 +0000 UTC]

I am having a lot of problems finding this download from that link.ย  The website must have changed.

๐Ÿ‘: 0 โฉ: 1

mhc916 In reply to mhc916 [2014-08-04 16:19:08 +0000 UTC]

Nevermind.ย  Doesn't hurt to read everything.

๐Ÿ‘: 0 โฉ: 0

FamousDave420 [2013-10-26 13:24:08 +0000 UTC]

Awesome model build.

๐Ÿ‘: 0 โฉ: 0

moddangz [2013-10-19 08:57:50 +0000 UTC]

good

๐Ÿ‘: 0 โฉ: 0

DeadmanGreed [2013-06-29 22:05:21 +0000 UTC]

REALMENTE te has esforzado en Mucho HACER this pisos de Trabajo te felicito hijo Pocas las Personas Que logran HACER this pisos de Proyectos Y Que No Se Rinden en el Proceso, te felicito Pero me gustaria Que me ayudaras con algoritmo seria sin gran favor HACIA millas Necesito la clave desearia Modificar el tamano pรกrr TRATAR de HACER uno una escala de Como traje personal si me ayudares te estare eternamente Agradecido por que para mi seria realizar el mismo proyecto que tuviste en mente desde el inicio pero dandole vida para que muchas personas puedan apreciar tu arte creado

๐Ÿ‘: 0 โฉ: 0

DeadmanGreed [2013-06-29 22:04:20 +0000 UTC]

REALMENTE te has esforzado en Mucho HACER this pisos de Trabajo te felicito hijo Pocas las Personas Que logran HACER this pisos de Proyectos Y Que No Se Rinden en el Proceso, te felicito Pero me gustaria Que me ayudaras con algoritmo seria sin gran favor HACIA millas Necesito la clave desearia Modificar el tamano pรกrr TRATAR de HACER uno una escala de Como traje personal si me ayudares te estare eternamente Agradecido por que para mi seria realizar el mismo proyecto que tuviste en mente desde el inicio pero dandole vida para que muchas personas puedan apreciar tu arte creado

๐Ÿ‘: 0 โฉ: 0

DeadmanGreed [2013-06-29 22:04:12 +0000 UTC]

REALMENTE te has esforzado en Mucho HACER this pisos de Trabajo te felicito hijo Pocas las Personas Que logran HACER this pisos de Proyectos Y Que No Se Rinden en el Proceso, te felicito Pero me gustaria Que me ayudaras con algoritmo seria sin gran favor HACIA millas Necesito la clave desearia Modificar el tamano pรกrr TRATAR de HACER uno una escala de Como traje personal si me ayudares te estare eternamente Agradecido

๐Ÿ‘: 0 โฉ: 0

tonygrafx [2013-06-07 08:07:51 +0000 UTC]

The finished model is awe-inspiring. I can imagine what you mean when you commented about the difficulty you had with the back pack. I've yet to tackle a paper model as complex as this one, though the air craft carrier Akagi and the SD lady gundam comes a bit close...I think. Anyway, thanks for the opportunity to make your model. I 'll try to do you proud!

๐Ÿ‘: 0 โฉ: 0

Draconis1609 [2013-05-03 15:25:43 +0000 UTC]

Wow this looks just so damn badass and I would love to build it. But I get the feeling it's going to completely kill me building it lol. I wanted to ask a few things though, you mentioned it's best to print it on A3 paper, I guess cause of the small parts? Also which gram paper would you recommend for this model? And finally a more general question, how do you make such clean folds without any white showing?

๐Ÿ‘: 0 โฉ: 0

Nature3 [2013-03-30 14:46:13 +0000 UTC]

I cant find the sheets on that webpage. They are all in a foreign language.

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to Nature3 [2013-03-30 20:38:33 +0000 UTC]

just press the download button at the top

๐Ÿ‘: 0 โฉ: 0

juankcp [2013-01-23 14:25:57 +0000 UTC]

magnifico trabajo

๐Ÿ‘: 0 โฉ: 0

arm4n [2012-10-29 20:21:24 +0000 UTC]

Thank you very much !! I didnt find the download link for the first time and became almost frustated I just clicked the link to the "justpape"-homepage I think this will be my next papercraft-project ! I've built Tie-Interceptor from Starwars and the Mammoth tank from C&C 3 so far. I hope I have enough experience to build this complicated and AWESOME Mech !! Thank you again !

๐Ÿ‘: 0 โฉ: 0

arm4n [2012-10-29 20:17:38 +0000 UTC]

Thank you very much !!! I didnt found the download button at first time and just clicked the link to "justpape"-homepage. This will be my next project !! I've built Tie-Interceptor and Mammoth Tank from C&C3 so far ! I hope I have enough experience to build this complicated and AWESOME Mech !!! Thank you again !!

๐Ÿ‘: 0 โฉ: 0

rubenimus21 [2012-08-23 11:57:32 +0000 UTC]

dude i loved this game SO much
thank u for making this :3

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to rubenimus21 [2012-09-06 09:34:56 +0000 UTC]

very welcome
glad you like it

๐Ÿ‘: 0 โฉ: 0

illifas [2012-05-29 05:06:06 +0000 UTC]

Most impressive thing I saw today. It even looks better than some Gundam plastic models.

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to illifas [2012-06-03 12:22:30 +0000 UTC]

thank you very much
that is always the major challenge, to let the models look not like paper

๐Ÿ‘: 0 โฉ: 0

camihardrock [2012-05-17 15:45:44 +0000 UTC]

thanks

๐Ÿ‘: 0 โฉ: 0

camihardrock [2012-05-17 15:15:57 +0000 UTC]

thanks

๐Ÿ‘: 0 โฉ: 0

camihardrock [2012-05-17 15:15:49 +0000 UTC]

thanks

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to camihardrock [2012-05-27 13:17:04 +0000 UTC]

welcome

๐Ÿ‘: 0 โฉ: 0

ChileConCarnage [2012-05-06 08:24:38 +0000 UTC]

Are you ever worried that someone might bring over their little kid to your place and they would see something like this and think it was a toy (like I do when I look at it) and they would pick it up and mash it on accident?

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to ChileConCarnage [2012-05-06 13:30:35 +0000 UTC]

haha no, the big models standing 2 meters high in my shelf

๐Ÿ‘: 0 โฉ: 0

KinGBaKeRo [2012-05-01 01:22:14 +0000 UTC]

OMGOMGOMGOMGOMGOMGOMGOMGOMGOMGOMGOMGOMGOMG!!!!!!!!!!!!!!!!


IM JUST TOOOO /OMG~!!!

The detail is amazing~! it put a tear in my eye :') I miss this game and this mecha. had one

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to KinGBaKeRo [2012-05-06 13:32:07 +0000 UTC]

i'm glad you like it

๐Ÿ‘: 0 โฉ: 1

KinGBaKeRo In reply to Destro2k [2012-05-14 10:46:02 +0000 UTC]

Impossible that i would not like it. i had one ingame

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to KinGBaKeRo [2012-05-18 13:58:06 +0000 UTC]

cool
i don't know when i'm in the mood for
but i downloaded the client and figured out to export the models
a lot cool stuff there

๐Ÿ‘: 0 โฉ: 1

KinGBaKeRo In reply to Destro2k [2012-05-26 04:20:10 +0000 UTC]

damn youu~!!! <3 xD still great art.. em still not over it haha

๐Ÿ‘: 0 โฉ: 0

kyphoscoliosis [2012-04-07 18:22:35 +0000 UTC]

Oh... my sweet lord.
You are definitely the single best paper craftist I've ever seen Oo;

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to kyphoscoliosis [2012-04-09 10:33:16 +0000 UTC]

naaaah
just a bit crazy and obsessed

๐Ÿ‘: 0 โฉ: 0

T-blan [2012-04-04 04:42:08 +0000 UTC]

awesome

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to T-blan [2012-04-09 10:32:17 +0000 UTC]

thank you

๐Ÿ‘: 0 โฉ: 0

Arlioz [2012-02-18 22:25:32 +0000 UTC]

Rip exteel

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to Arlioz [2012-02-19 13:28:03 +0000 UTC]

well, sad, i noticed that game right before the server shut down

๐Ÿ‘: 0 โฉ: 1

Arlioz In reply to Destro2k [2012-02-20 21:47:24 +0000 UTC]

I played it for about a year, then kinda faded off due to school's seriousness, and I went back to play and uncovered a horrific surprise: they had shut it down a day before. Sad day.

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to Arlioz [2012-02-24 13:09:19 +0000 UTC]

well it's maybe not that big thing like re-open the servers
but the game was based on the unreal engine
and i can convert the files into models
i think i will take a look at a few mecha models

๐Ÿ‘: 0 โฉ: 0

cycurtis [2011-12-24 15:36:51 +0000 UTC]

i see it now, it on the upper right corner

sorry im new here in DA

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to cycurtis [2011-12-24 16:41:25 +0000 UTC]

no problem

๐Ÿ‘: 0 โฉ: 0

cycurtis [2011-12-24 02:54:17 +0000 UTC]

sir please re-upload the files, i want to build it too

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to cycurtis [2011-12-24 13:44:45 +0000 UTC]

then just click on download

๐Ÿ‘: 0 โฉ: 0

terrorsound [2011-10-23 18:04:00 +0000 UTC]

this is a good one!! I need to start building mecha, I'm in motorcycle mode right now with the yamaha MT 01..

๐Ÿ‘: 0 โฉ: 1

Destro2k In reply to terrorsound [2011-10-29 13:14:54 +0000 UTC]

i should build also more mechas
i just love this and there are so much and cool models out there

๐Ÿ‘: 0 โฉ: 0

zandere123 [2011-09-25 12:05:39 +0000 UTC]

nice build

๐Ÿ‘: 0 โฉ: 1


| Next =>