HOME | DD

Description
This is my Entry to 's Design Contest,

This Medabots design was based off the Amphion Floridensis Moth species:   ( though its not a perfect 1:1 recreation of the colour pallet or wing pattern, I tried to make it more simple yet retaining aspects of the original reference )

The overall concept for this design was to make something that specialized in close quarters combat.

=Weapons=

Left Arm: For the left arm I decided on making retractable puncher spikes that once impaled into a target an electrical discharge is then sent through the spikes and into the opponent rendering them immobile for a short period of time ( works similar to a taser ) of course the base of the spikes are encased in rubber to prevent the discharge from having an effect on the user.

Right Arm: For the right arm I designed a CQC short barreled shotgun that can be reconfigured to act as a single shot revolver type weapon, I made the right arm bulkier as it needs more space to house the firing mechanism and ammunition. ( A variant of the Puncher Spikes is available for the Right Arm )

=Fighting Style Concept=

The idea of these weapons were for them to work in tandem, for example: if you're engaging an opponent first you would impale them with the puncher spikes to render them immobile, then you would follow up with a blast to any vital area with the shotgun/or Revolver.

Kicks are also viable, but I will explain why in a minute.

= Propulsion =

Located in the Tail and Wings are Anti-Gravity Engines which allows the Unit to fly at high speeds or to hover while making minimal noise ( on the Character Sheet above are Internal shots of the Anti-Gravity engines/Propulsion system so you can get a general idea of how they look).

In a worse case scenario the Anti-Gravity Engine located in the tail can be set to self-destruct with a blast radius of 20 meters (though not tested, results may vary)

=Lower Body=

The legs were designed with power and agility in mind, this unit can jump to a height of 5 meters without the aid of the Anti-Gravity Propulsion system and has a sprint speed of approximately 15 MPH, bearing this in mind a high power kick from this unit can cause serious damage.

The joints in the legs are encased in a Nano-Fiber material to prevent dust and debris from building up and causing long term damage to the joint mechanisms ( would recommend removing Nano-Fiber material before engaging in underwater situations but not doing so would not have any drastic effects on the units leg systems )

This Nano-Fiber material is also located around the joins for the wings.

=High Speed Flight Configuration=


As is a common trait in other Suzumega type models this unit has the ability to streamline itself to become more aerodynamic allowing it to active higher speeds of flight, utilizing the double joint in its legs this unit can fold its legs up and use the rear claw on its heal as a supplementary air stabilizer to maintain balance while flying as it lacks the necessary stabilizer fins on its tail.

That concludes my entry for the design contest, I may still make anther just for the hell of it.

Art (c)

Edit: Tried to fix the image so it doesn't seem abit fuzzy but for some reason its not working, so hopefully its not that bad.

Description
This is my Entry to 's Design Contest,

This Medabots design was based off the Amphion Floridensis Moth species:   ( though its not a perfect 1:1 recreation of the colour pallet or wing pattern, I tried to make it more simple yet retaining aspects of the original reference )

The overall concept for this design was to make something that specialized in close quarters combat.

=Weapons=

Left Arm: For the left arm I decided on making retractable puncher spikes that once impaled into a target an electrical discharge is then sent through the spikes and into the opponent rendering them immobile for a short period of time ( works similar to a taser ) of course the base of the spikes are encased in rubber to prevent the discharge from having an effect on the user.

Right Arm: For the right arm I designed a CQC short barreled shotgun that can be reconfigured to act as a single shot revolver type weapon, I made the right arm bulkier as it needs more space to house the firing mechanism and ammunition. ( A variant of the Puncher Spikes is available for the Right Arm )

=Fighting Style Concept=

The idea of these weapons were for them to work in tandem, for example: if you're engaging an opponent first you would impale them with the puncher spikes to render them immobile, then you would follow up with a blast to any vital area with the shotgun/or Revolver.

Kicks are also viable, but I will explain why in a minute.

= Propulsion =

Located in the Tail and Wings are Anti-Gravity Engines which allows the Unit to fly at high speeds or to hover while making minimal noise ( on the Character Sheet above are Internal shots of the Anti-Gravity engines/Propulsion system so you can get a general idea of how they look).

In a worse case scenario the Anti-Gravity Engine located in the tail can be set to self-destruct with a blast radius of 20 meters (though not tested, results may vary)

=Lower Body=

The legs were designed with power and agility in mind, this unit can jump to a height of 5 meters without the aid of the Anti-Gravity Propulsion system and has a sprint speed of approximately 15 MPH, bearing this in mind a high power kick from this unit can cause serious damage.

The joints in the legs are encased in a Nano-Fiber material to prevent dust and debris from building up and causing long term damage to the joint mechanisms ( would recommend removing Nano-Fiber material before engaging in underwater situations but not doing so would not have any drastic effects on the units leg systems )

This Nano-Fiber material is also located around the joins for the wings.

=High Speed Flight Configuration=


As is a common trait in other Suzumega type models this unit has the ability to streamline itself to become more aerodynamic allowing it to active higher speeds of flight, utilizing the double joint in its legs this unit can fold its legs up and use the rear claw on its heal as a supplementary air stabilizer to maintain balance while flying as it lacks the necessary stabilizer fins on its tail.

That concludes my entry for the design contest, I may still make anther just for the hell of it.

Art (c)

Edit: Tried to fix the image so it doesn't seem abit fuzzy but for some reason its not working, so hopefully its not that bad.