HOME | DD
KimmiJe — Tiny Dragon Tutorial Part 1
#dragon #plushie #tutorial #flightrising
Published: 2017-09-02 11:59:11 +0000 UTC; Views: 3231; Favourites: 31; Downloads: 23
Redirect to original
Description
A tutorial for the base pattern for a Deity Plush from Flight RisingPattern ->
1.Ingredients:
a.Felt
b.Stuffing
c.Printed Pattern
d.Thread
e.Needles
f.Scissors
g.Extra Bits
2.Print Pattern to fit on A4, if you need a seam allowance draw that on now. Cut out felt pieces, if joining colours make sure they're still the right size after cutting.
3.Body:
a.Sew both pieces of the body back together along the green line
b.Do the same for the body front
c.Sew the front and back together starting from point (a) leaving the top open
d.Turn out and stuff
4.Tail
a.Sew the darts together on the inside tail
b.Sew the inside and outside together along the long edges starting at point (b)
c.Turn out and stuff
5.Legs
a.Sew two leg pieces around one foot
b.Sew the sides starting at the foot, leave a gap
c.Turn out and stuff
d.Sew closed
e.Repeat for other Leg
6.Arms
a.Sew top and underside together starting at point (c) leaving a gap
b.Turn out and stuff
c.Sew closed
d.Repeat for other Arm
Part 2 ->
Related content
Comments: 3
hello, I know this is old but what stitch did you use for this? i'd like to know so I can do it properly! :>
👍: 0 ⏩: 1
I use a basic whip stitch for everything with right sides together, you'll definitely need to test it on the material you're using because I've found with some felts and knits it just shreds the edges, if that happens, you should add a seam allowance and use a strait stitch, it wont have quite the same finish, but it will be less likely to fall apart on you
👍: 0 ⏩: 1
Thank you! Sorry it took forever to get back, haha
👍: 0 ⏩: 0