HOME | DD

Description
This is really basic stuff that helps his appearance look more like he prototype, and, well... like Trunks. These can be pretty easily replicated for anyone who's as anal as I am, so feel free to ask away if I don't cover things properly here.

For the wrists, hair dry/heat up the piece how ever you please, remove the universal disk joint, then remove the entire section after the rivet. Create a new rivet with what appears to be the same length going back from what you've just trimmed. Cut away a lot of the plastic on the arm, inside of the sleeve. Make sure not to cut out the bulging cylinder inside, which'll hold it in. For the neck, do NOT do what I did. I had taken my extra one apart a while ago, and used some of the sockets for pieces already, so I had forgotten that there's actually a static peg that holds on to the neck joint. What you want to do is this: remove the jacket (requires cutting, this is also a mod covered by some other folk who wanted him to pull off the Burning Attack). Unscrew the two screws on his back, then break the two glue seals at the tip of the neck. Once you have it removed, you'll have what I explained earlier. Cut it off at the lowest point. I'm near positive that the peg will be too small to slide up and down properly, so you'll have to buffer it with glue or otherwise. Make sure not to just glue it in. Adjustability is really key with this, considering we don't have a lower neck joint and all of the same lengths don't always work for all poses.

Description
This is really basic stuff that helps his appearance look more like he prototype, and, well... like Trunks. These can be pretty easily replicated for anyone who's as anal as I am, so feel free to ask away if I don't cover things properly here.

For the wrists, hair dry/heat up the piece how ever you please, remove the universal disk joint, then remove the entire section after the rivet. Create a new rivet with what appears to be the same length going back from what you've just trimmed. Cut away a lot of the plastic on the arm, inside of the sleeve. Make sure not to cut out the bulging cylinder inside, which'll hold it in. For the neck, do NOT do what I did. I had taken my extra one apart a while ago, and used some of the sockets for pieces already, so I had forgotten that there's actually a static peg that holds on to the neck joint. What you want to do is this: remove the jacket (requires cutting, this is also a mod covered by some other folk who wanted him to pull off the Burning Attack). Unscrew the two screws on his back, then break the two glue seals at the tip of the neck. Once you have it removed, you'll have what I explained earlier. Cut it off at the lowest point. I'm near positive that the peg will be too small to slide up and down properly, so you'll have to buffer it with glue or otherwise. Make sure not to just glue it in. Adjustability is really key with this, considering we don't have a lower neck joint and all of the same lengths don't always work for all poses.