HOME | DD
NyaLinaa β PMX version switch
Published: 2015-08-13 17:58:42 +0000 UTC; Views: 2366; Favourites: 21; Downloads: 7
Redirect to original
Description
Hi guysI was working on a model, a new edit, it was working well until now. When I try to open it in MMD, this pop-up shows up and I can't load my model...
Do you have any explanation ? Any help ? Any solution ?
Thank you !
Some infos :
- I work on .pmx files only.
- each part works well when I load them separately
- the error window of PMX does not show any error
--------------------------- EDIT ---------------------------
THank you very much to everybody who commented !
SarinaCFG helped me a lot with this, so now I have the solution.
Actually, I added a soft body on my model (accidentally, I guess), but pmx2.00 does not support it, neither MMD v9.10 does.
So, I just had to delete the soft body, and switch the version from 2.10 to 2.00.
I changed the deviation to let you see the process, in case of anyone has someday the same problem.
Hope it will help you as much as it helped me !
Once more, Thank you very much SarinaCFG !
-------------------------------------------------------------
Related content
Comments: 40
Omg, thank you soooo much! This was extremely helpful
π: 0 β©: 1
π: 0 β©: 0
Thanks for your help!! ^^ But, now i have another problem... The MMDΒ gives me an ad that says "mmd stopped working" and it closes... you know what I could do? u.u
π: 0 β©: 1
Oh my... I'm so sorry I didn't see your comment sooner !
You should have a look into you models infos and check what's wrong. Most of the time, the shutting down problem is caused by the physics or the joints.
Chek it out by opening your model into PMXeditor, then on the main window clic File > PMX Infos.
π: 0 β©: 0
hold on ill send you something
π: 0 β©: 0
Your model is pmx 2.10, but MMD supports only pmx 2.0
|IDK which supports actually|
Just change the version of pmx in editor.
\sorry for my bad English (γΟγ½)\
π: 0 β©: 2
Yes, thank you, this is the problem.
May you tell me how to change the version in PMXe ?
\Don't worry, your English is good enough and you're really helpful !\
π: 0 β©: 0
Like this sta.sh/018vpdg8jb2p
π: 0 β©: 1
Oh thank you so much !!! You're awesome !!
I understood the problem : I added a soft body (accident, I guess), but pmx 2.00 does not support it, and MMD 9.10 neither ! I deleted it, switched the version (thanks to your screenshot), and now I can load it !!
Once more, thank you very very much for your help !!
π: 0 β©: 1
Maybe you should download the newer version of mmd
π: 0 β©: 1
I'm going to update MMD yes, but I also want to understand how PMXe switched itself because the face of my model (that I made 30 minutes before the broken wip) is good and loads well in MMD ^^'
π: 0 β©: 1
Oh, good luck then )
I have started using pmx editor recently, and don't now much about it yet ><
π: 0 β©: 0
I had this happen to me at one point but i forgot how I did it, I think I just opened it in a an older PMX and saved it, sorry I can't help much. DX
π: 0 β©: 1
I tried to open it in an older PMXe version, but the software only says "no way dude, I don't want to load it" :')
π: 0 β©: 1
I read a lot of the comments to see if someone already answered your question so here's what I think may have happened. Now I myself have never experienced this problem but if I had to take a guess you may have added something to your model that was either created or edited on a higher version of PMX editor that this version of MMD can't readily read for whatever reason. You said above that each part works fine on it's own so that would disprove my hunch but that's all I can really guess is the problem here.
That, or MMD is acting up for no reason other than just to act up. When I created my edit of Symphonica her fingers would glitch out whenever I loaded the motion data for Traditional version Bad Apple. I examined my model plenty and there was no reason for this glitch to happen other than MMD itself glitching out. This glitch has never again happened to my model so I feel it was a problem that just randomly occurred for no good reason.
Now if this keeps happening I'd say shutdown your computer for 10-20 minutes and then try to work with MMD after that. Don't know if you did that or not already but if you did then the very last thing I can think of is to make absolutely sure that all your constraints are attached to the correct physics. I know you're a seasoned MMD user but it never hurts to check, even I make this mistake sometimes and I've been using these programs for 5 years.
π: 0 β©: 1
Thank you very very much rational and considered reply.
I shut down my PC this night, but the problem was the same today ^^'
I finally found the solution !!
Actually, I added a soft body on my model (accidentally, I guess), but pmx2.00 does not support it, neither MMD v9.10 does. So, I just had to delete the soft body, switch the version from 2.10 to 2.00 (on PMXe window : γγ‘γ€γ«(F) > ?????????(M) > PMXγγΌγΈγ§γ³????????(V) > 2.0(L) don't know the right kanji, sorry ^^"), and then now I can load my model on MMD !!
π: 0 β©: 1
Oh okay, well that's great! I'm glad that your problem got resolved.
π: 0 β©: 0
this happened to me too
idk why
so i just went back to went back to an earlier version of the model i was editing...
///is unhelpful
π: 0 β©: 1
That's what I was thinking about.... Well, if I don't find any solution I'll do it too ^^"
π: 0 β©: 0
You made an PMX model with an newer version of pmx, pmx 2,16 (i think)
and you need to convert it to pmx 2.00
actually i don't know how to do it, but i'm sure there's some tutorials around here!
but this newer version of pmx works on mmm, i think--
π: 0 β©: 1
How is it even possible ?? I did'nt change anything, I use the same version of PMXe since 2014 ! It's the first time I have this problem, the previous WIP don't even have this...
π: 0 β©: 2
actually it kind of poof, just happens, it happened with me lots of times ago...
π: 0 β©: 0
try opening them on MMM instead of MMD?
π: 0 β©: 0
I have it to but I have last version of mmd
π: 0 β©: 1
then wtf go to learn mmd downdloads and download the latest ver like wtf mate how can you even animate with that
you cant even load a model with the olders mmd wtf
π: 0 β©: 0
I think you need to get a better version of MMD Then
π: 0 β©: 1
I don't understand because it's the 7th model I do this week and i didn't have any problem, nothing changed with the softwares...
π: 0 β©: 1
Well giving it a shot may be worthwhile!
π: 0 β©: 1
Haha sometimes I really want to learn to my PC how to fly by the window ^^
π: 0 β©: 0
Please you commented, so explain what you mean...
What should turn it on and off ?
π: 0 β©: 1
Or reinstall. Both could work. I'm not really sure what the issue is but I can google for more help.
π: 0 β©: 0