HOME | DD
Skele-kitty — Azurill Papercraft
Published: 2010-12-11 23:25:29 +0000 UTC; Views: 8302; Favourites: 81; Downloads: 311
Redirect to original
Description
All together now ... "D'aaaaaaaaaaaaaaaaaawwwwww!"Another round Paperpoké model, but this time it's two for the price of one! And yes, it actually balances on that tail bobble (with the aid of a 5¢ coin), unless there is a sudden gust of wind. I read that the height of this Pokémon was 20cm tall - I guess it would just be the body height, not body on bobble height - so this model is half its "real-life" size.
It's a pretty basic build, the only tip I think I need to give is attach the bottom of the body to the top of the bobble with a drop of superglue, and tweezers are essential for the tail.
Related content
Comments: 71
where did you find the papercraft for it?
need my azurill army
👍: 0 ⏩: 1
No, I didn't design these, I just test built them, but thank you.
👍: 0 ⏩: 0
wah. How did you get the body to be so smoove looking? I've tried using the lineless model without embossing the lines and the tabs were giving me so much issues. It just didn't seem to line up properly or there was this huge gap left, then placing so much tension caused the paper to dent near the glued tabs. >_<" So i built another face using the lineless model but embossing it this time, and its getting so square"ish. >_<"
👍: 0 ⏩: 1
When you build lineless models, you should still emboss the tab-lines. But the secret is in the glue (I keep telling everyone, but no one listens). If you have crap glue, you cannot align the model pieces perfectly, no matter how good your skills are. Good glue will cut your building time in half and make your models amazing!
That's why I don't testbuild anymore - my glue is no longer available 
👍: 0 ⏩: 1
GASP! You don't testbuild anymore. >_<" sad face. Aleene's tacky glue seems to work alright for me. Well it beat the rest, compared to all the other test trials I had to go through for glue. loll.
I do emboss the tabs, but sometimes I take a ruler and use a pencil to draw out the lines that appear on a lined model, unto a lineless model, emboss it, and then erase the pencil line so it helps with square like shaped models instead of printing out lined models and having that lined mark on the model's face (which bothers me oh so much) loll. But since this model is a circle, embossing it like I usually have, gives it a squarish shape? >_<" I don't know, maybe I'm just embossing it too much or I should curl the pieces first without the embossment? Meh. I'll try again. loll. This model is too cute to give up so easily.
Btw, may I ask what kind of glue you used before?
👍: 0 ⏩: 1
If you choose to do lined models, I find that it's best to emboss, but DO NOT fold the embossed lines, but rather, allow them to help you by bending at the weak points you just made.
Even the lineless models do need embossing in certain spots, where an angle of the model requires a less than 90 degree bend in the paper, eg: claw, tooth, etc. This is why we always include the PDO, so that the builder can see the 3D model and assess how to approach the construction.
I use to use Power Pritt Gel, but like I said, they don't make it any more, and the replacement product just isn't nearly as good as the original stuff - it takes 4 times longer to stick, but when it does, it's more or less the same - but it means it takes me 4 times longer to build anything.
👍: 0 ⏩: 0
"D'aaaaaaaaaaaawwwwwwwwwwww!" *Squeals* I found the paperpokes site first and clicked on the link to your name there and it brought me to your dA page 
👍: 0 ⏩: 1
I can imagine - it's not everyday that you receive a "real life" Pokémon!
👍: 0 ⏩: 1
yesh *w* now someone just needs to make a site like this for making pokemon plushies and I'm going to sign up for sewing classes asap... I WANNA HAVE A HUGGABLE CHIKORITA AND PIKACHU AND PICHU AND EEVEE AND ESPEON AND JOLTEON AND AND AND... Too many to name XD
👍: 0 ⏩: 1
Well, that would be a LOT of work, on your part!
Good luck with that :3
👍: 0 ⏩: 1
XD think I'll sick to paper for now... gotta tackle a houndour and houndoom for a friend XP is the houndoom doable with with good quality paper and white liquid glue? and tweezers?
👍: 0 ⏩: 1
Of course! We don't make impossible papercraft, lol! Every model we make goes through several builds to ensure the average person with intermediate skills can reproduce it - I built Charizard 7 times before I was satisfied that it was okay to release.
<120gsm paper, the best paper glue you can find and tweezers should be an essential part of your papercraft toolkit. With these three items, and a pair of scissors, you should be able to build anything
👍: 0 ⏩: 1
Q__Q 
...And I just used up about a minute of your life XD How did you get into papercrafts?
👍: 0 ⏩: 1
Unfortunately, Henkel have discontinued my glue, and the replacement product just isn't the same
I started papercrafting because I really wanted a vinyl Goomba toy, and didn't want to pay the price that they were asking. Then I found the Goomba template online and it went on from there.
I am pretty much retired re: papercraft. I do one or two occasionally, but since I ran out of my glue, I have been really put off modeling. Although, I am a little obsessed with Portal 2 at the moment, and have decided to make a "life-size" cube. It's gonna be 50cm³, which apparently isn't big enough, but plenty big for me. This will be my fifth Weighted companion cube, lol!
👍: 0 ⏩: 1
Darn that must suck
Goomba! XD Those things from mario that are like brown mushrooms and attack you?
o.O 50cm3? That's huge! I don't play that game but I just searched up images of the cubes and they look cool!
Do you do anything else apart from papercrafts art-wise? cause I'm too lazy to go look through your gallery XD
👍: 0 ⏩: 1
hmmm, I haven't been able to find a satisfactory replacement glue, but there has to be something, somewhere! Someone said Artist/rubber cement ... I think I'll have to look into that one.
Yeah, goombas, they make me lol! I'd love to make a nice goomba, but I just don't get the time to make anything anymore ... other than this cube :3 I was told that the IRL size of a cube was about 1m³, so I guess, mine is exactly half size! I'm still working out the technical aspects of the model, but I got box-card, so I am all set to construct it now.
I go to uni full time. I am on holidays for a week now, but when I get back, any papercraft will be put on the back-burner. I study graphic design. It's the best!
👍: 0 ⏩: 1
XD the goombas scared me when i first encountered them... "Oh, why hi there little mushro- Wait huh my health's going down? Huh? Whu-" "GAME OVER." "W-w-w-w-WTF?!?!?!?!? I didn't save!!!" XXD
Erm actually it's one eighth of the size... 50x50x50= 125000 while 100x100x100= 1000000 and 1000000/125000=8... eheh... Sorry to disappoint
Graphic design o.o Sounds quite cool! Still in high school X____X *sighs*
👍: 0 ⏩: 1
I LOVE the goombas! They make me lol so hard, especially when they do that jump,turn,run-in-a-random-direction-towards-you thing.
Hahaha! I always did suck at math - we're not exactly on speaking terms.
👍: 0 ⏩: 1
XD The Boo-like ghosts were cute, but they were nasty since they were so hard to hit. BOO~ He's so cute. I always play him on Mario Party. King Boo's haunted mansion scares me... You know, just a bit... What with all the shifting chambers and the such...
Good old King Kong's Tree-High Kingdon Thingy whatever it's called. The first ground I played on, loved it. Mario Party has such good graphics *w*
XD A lot of people have trouble with math, I'm lucky I'm not one of them. ASIAN POWAH! ^^'
Aaand I should be doing my homework right now...
👍: 0 ⏩: 0
I really loved this one 
👍: 0 ⏩: 1
hmmm, looks like sometime in the middle of the year.
👍: 0 ⏩: 0
oh....every day i want to see a mismagius on my shelf
👍: 0 ⏩: 0
It is super cute! I am very fond of making the baby pokés for that reason along
👍: 0 ⏩: 0
será que podrás inventar el papercraft de mismagius
👍: 0 ⏩: 0
Don't worry, you will get a chance to build it ... sort of soonish
👍: 0 ⏩: 1
Oooh,yay! 
👍: 0 ⏩: 1
Nah, it was actually pretty easy - the hardest part was getting it to stay upright, lol!
👍: 0 ⏩: 0
AWWWWWWWWWWWWWW ~ I love her ~ It is my fav pokemon ~ You do so welll, very welll
👍: 0 ⏩: 1
This is your favorite?! Really?
👍: 0 ⏩: 1
Yup that is right. At the first time, I become tb I really want this. Yesterday, I and brandon talk and will ask you azurill for me
👍: 0 ⏩: 1
| Next =>