HOME | DD

StormL — Mine Turtle Instructions

Published: 2012-05-16 15:23:37 +0000 UTC; Views: 22167; Favourites: 163; Downloads: 308
Redirect to original
Description I hope everything can be understood. The "Accordion Method" can be found here [link] (I'm not quite sure if anybody else has ever used this method, but I'll call it like that by now.)
I put 5 "accordion lines" but you can put more or less, it's up to you, as well as the length. (Depending on how many, and how long you make it, is how the button will bounce) and well, if you have any doubt, ask away!.
Related content

StormL - Mine Turtle Papercraft

StormL - Gir Instructions

StormL - Mine Turtle DA upload

StormL - Beartato Papercraft Instructions

StormL - The World v1

StormL - The World Papercraft DA Upload

StormL - Sumilidon Papercraft

StormL - The World Papercraft

StormL - Accordion Method

brynls - The Gang

SlarPixelReplay - Gesture Sessions Vol.2 -38 poses-

KombatDaveMaster - GMOD Minecraft: Beware of Herobrine

brynls - The Gang

SlarPixelReplay - Gesture Sessions Vol.2 -38 poses-

Disyukov - NSFW PACK for Artists, Body Poses, Milk, Tears...

brynls - Seedy Farmer [🤖]

brynls - Zand3r

Libbyseay - 3D Link Perler Tutorial

moose-on-a-jew - part two

JinxBunny - Ghost Cubes

neubauten - Origami Lego ... because

Pandannabelle - Foam Domo Tutorial

Cahoonas - Origami Rock (Tom) Diagram

Saru-Hime - Polymer Clay Frog Tutorial

LightningMcTurner - Polymer Clay Robot Tutorial

cihutka123 - clay Nikon tutorial
Comments: 148

Avatar260 [2015-05-16 00:05:06 +0000 UTC]

Hello Mine Turtle

👍: 0 ⏩: 0

alexisgeneral15 [2014-01-06 19:58:30 +0000 UTC]

Turtle cute sorry no talk english

👍: 0 ⏩: 0

pieflavoredpieman [2013-08-19 08:22:15 +0000 UTC]

Dude so what kind of paper did you use or does it even matter

👍: 0 ⏩: 1

StormL In reply to pieflavoredpieman [2013-08-19 17:27:04 +0000 UTC]

I used A4 80 milligram paper, it's pretty common over here... but any kind of paper should be fine, If I could make it with a paper so thin, any kind of paper should work as well. It really depends on you, if you want something that doesn't break after falling after 20 times, you should use something thicker (around 120 milligram) or you can always make it tougher by applying glue over the model with a paintbrush (to do that you must be careful not to put too much glue, so try a few times on something else before trying this). 

Hope this helped! if it didn't, feel free to ask me anything

👍: 0 ⏩: 1

pieflavoredpieman In reply to StormL [2013-08-20 03:22:01 +0000 UTC]

thanks for this it really helped

👍: 0 ⏩: 0

featherf1ame [2013-07-26 00:51:47 +0000 UTC]

Hello!

👍: 0 ⏩: 1

StormL In reply to featherf1ame [2013-07-26 22:51:10 +0000 UTC]

Hahahah xD I like you 

👍: 0 ⏩: 1

featherf1ame In reply to StormL [2013-07-27 21:16:28 +0000 UTC]

👍: 0 ⏩: 0

JaredTheCat [2013-05-19 15:08:08 +0000 UTC]

:iconmineturlteplz: Hello!

👍: 0 ⏩: 1

StormL In reply to JaredTheCat [2013-05-21 21:07:39 +0000 UTC]

lol maybe you were looking for this?

👍: 0 ⏩: 1

JaredTheCat In reply to StormL [2013-05-22 21:50:48 +0000 UTC]

👍: 0 ⏩: 1

StormL In reply to JaredTheCat [2013-05-29 03:41:21 +0000 UTC]

Hahahahha xD

👍: 0 ⏩: 0

L33TSKI [2013-05-19 02:04:37 +0000 UTC]

is there a print out? if not any exact measurements?

👍: 0 ⏩: 1

StormL In reply to L33TSKI [2013-05-19 14:52:19 +0000 UTC]

Yes, there is a print out, and it's free. It's on the description of the deviant, It's in a .rar file, all you have to do is download it, extract it, print the pdf file cut the pieces, and follow the instructions above. I'll exaplain better on the comment made on the deviant just in case c:

👍: 0 ⏩: 0

Chipmunk-iPod [2013-05-10 01:08:54 +0000 UTC]

No problems at all on my side, everything worked out fine! °~°

👍: 0 ⏩: 1

StormL In reply to Chipmunk-iPod [2013-05-12 22:35:10 +0000 UTC]

good to hear that c:

👍: 0 ⏩: 0

Chipmunk-iPod [2013-05-10 01:07:15 +0000 UTC]

Sorry, the link was supposed to take you to the pic i took of it, and i think my links dont work at all now. Sorry again for the inconvenience!

👍: 0 ⏩: 1

StormL In reply to Chipmunk-iPod [2013-05-12 22:35:48 +0000 UTC]

Hahah no problem n_n I'd have liked to see the finished build though xD but I hope you liked the model!

👍: 0 ⏩: 0

Chipmunk-iPod [2013-05-07 03:59:10 +0000 UTC]

OHEMGEE! THAT IS THE CUTEST AND MOST AWESOME THINGY EVER!

👍: 0 ⏩: 1

StormL In reply to Chipmunk-iPod [2013-05-07 14:14:37 +0000 UTC]

Hahah I'm glad you liked it!

👍: 0 ⏩: 0

Chipmunk-iPod [2013-05-05 02:50:43 +0000 UTC]

finally figured it out after two days!!![link]
By the ways, i cut it out(by cut it out, i mean EVERYTHING W/ THE TINEEY TRIANGLES)Without cutting the tineey triangles, but going closely around them. turned out fine!

👍: 0 ⏩: 1

StormL In reply to Chipmunk-iPod [2013-05-07 14:17:04 +0000 UTC]

Awesome! What's your personal opinion about it? was it too hard or complicated? and I'm sorry but the link you posted just sends me to the browse section >.< Hope you enjoy your mine turtle c:

👍: 0 ⏩: 0

shadowsangel1 [2013-04-08 16:59:20 +0000 UTC]

Uh how do you make the parts. I know the accordion method but how do you make the other parts around it

👍: 0 ⏩: 1

StormL In reply to shadowsangel1 [2013-04-12 03:08:39 +0000 UTC]

well...you just cut the parts, fold the flaps, and paste them together with glue c: Basically, you need to put glue on the flaps, and then paste them on the other parts. It may get sticky if you put too much, or not paste at all if you don't put enough, but you'll know as you do it. I use a toothpick for precision and then just...glue the parts together xD

Hope that helped... Otherwise, just hit me with another question and I'll try to answer c:

👍: 0 ⏩: 1

shadowsangel1 In reply to StormL [2013-04-12 08:56:31 +0000 UTC]

Thanks

👍: 0 ⏩: 0

manaKnights [2013-04-08 05:45:11 +0000 UTC]

What kind of paper did you use? like regular printer paper or card stock? and if you did you used card stock any particular kind of card stock?

👍: 0 ⏩: 1

StormL In reply to manaKnights [2013-04-12 03:12:51 +0000 UTC]

I used regular A4 paper, 80 milligrams to be more specific, It's very common around here c: I made a special design for those who use harder paper, like card stock which is in the description (I just re sized the button for it to fit in case the paper is too thick)In case you don't have A4 paper, Normal printer paper should work just fine!

Hope that helped c: and good luck

👍: 0 ⏩: 0

kaitie95 [2013-03-10 21:57:45 +0000 UTC]

LOVE this!

👍: 0 ⏩: 1

StormL In reply to kaitie95 [2013-04-02 16:20:39 +0000 UTC]

Hahaha c: I'm glad to read that n_n

👍: 0 ⏩: 0

Qwerty1030zk [2013-03-05 23:45:14 +0000 UTC]

Read TEXt above last one XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD XD

👍: 0 ⏩: 1

StormL In reply to Qwerty1030zk [2013-04-02 16:22:08 +0000 UTC]

Hahhaha xD alskdjlaksjflakdglk

👍: 0 ⏩: 0

Drawerlover5 [2013-01-20 08:52:06 +0000 UTC]

THE RED TEXT ABOVE THE LAST PIC X'''''D

👍: 0 ⏩: 1

StormL In reply to Drawerlover5 [2013-01-21 21:45:15 +0000 UTC]

Hahahha xD You're the second person to actually read that Congratulations you've got an instant watcher! xD

👍: 0 ⏩: 0

Msrachelleighb [2012-12-19 21:53:00 +0000 UTC]

What are the different "parts"? (Parts 1, 2, and 3)

👍: 0 ⏩: 1

StormL In reply to Msrachelleighb [2012-12-21 20:34:32 +0000 UTC]

Those are the ones that are on the PDF, you can see the numbers there, it's just to difference the pieces. Also, in the picture you'll notice a really thin orange line, It's not too noticeable, but that's because the program I was using to edit the images didn't have the boldness that I needed for those lines.

👍: 0 ⏩: 0

Sunheart1 [2012-11-26 23:20:44 +0000 UTC]

👍: 0 ⏩: 1

StormL In reply to Sunheart1 [2012-12-02 20:45:53 +0000 UTC]

YEAH!!

👍: 0 ⏩: 1

Sunheart1 In reply to StormL [2012-12-02 21:21:52 +0000 UTC]

WOOOO HOOOO

👍: 0 ⏩: 1

StormL In reply to Sunheart1 [2012-12-02 21:33:03 +0000 UTC]

👍: 0 ⏩: 1

Sunheart1 In reply to StormL [2012-12-02 21:47:27 +0000 UTC]

👍: 0 ⏩: 1

StormL In reply to Sunheart1 [2012-12-10 04:59:19 +0000 UTC]

👍: 0 ⏩: 1

Sunheart1 In reply to StormL [2012-12-10 21:40:50 +0000 UTC]

lol

👍: 0 ⏩: 0

swapman6278 [2012-09-23 22:06:52 +0000 UTC]

Making it now!

👍: 0 ⏩: 1

StormL In reply to swapman6278 [2012-09-25 06:09:57 +0000 UTC]

Omg! Awesome! I would like to see the finished build n_n

👍: 0 ⏩: 0

boo3201 [2012-08-22 01:17:56 +0000 UTC]

👍: 0 ⏩: 1

StormL In reply to boo3201 [2012-08-26 01:51:16 +0000 UTC]

hahahah, That's a rude turtle, he forgot to say hello!
Hello!

xD

👍: 0 ⏩: 0

IloveAleu [2012-08-06 22:22:32 +0000 UTC]

Mine turtle!

👍: 0 ⏩: 1

StormL In reply to IloveAleu [2012-08-07 16:11:15 +0000 UTC]

Yay!

👍: 0 ⏩: 1

IloveAleu In reply to StormL [2012-08-08 13:59:41 +0000 UTC]


👍: 0 ⏩: 1

StormL In reply to IloveAleu [2012-08-08 23:20:13 +0000 UTC]

👍: 0 ⏩: 1


| Next =>