HOME | DD

Description
"As promised, here are the two sides of Colonel Mustard's Handcannon. As far as mechanics go, an internal boiler is activated and begins heating water within the weapon upon the flip the switch located on the lower left hand side of the gun, in turn building up steam with the intent of lethal/non-lethal power indicated by the gauge on the right hand side. Once in the red, shoot to kill; less than that could be stun, or maim respectively. The glass indicator valve allows the user to know how much water is left within the internal boiler before adding more through the hatch located within the priming wall (where one loads the shell). Excess steam and heat is released from the right hand valve as a precautionary measure to prevent damage to the user after each shot. Approximate fire/reload time between shots, with the boiler prepped, is 60 seconds give or take your time to reload the shell, as the boiler remains actively building pressure between firing once the trigger is released. A 3-5 minute warm up is required for the internal boiler based on the electric heating coil within, so that said, make sure you know if you're heading into a fire fight. Keep your eyes open and your trigger finger at the ready....oh, and lean into the shot. She packs a punch."
---Capt'n J

Description
"As promised, here are the two sides of Colonel Mustard's Handcannon. As far as mechanics go, an internal boiler is activated and begins heating water within the weapon upon the flip the switch located on the lower left hand side of the gun, in turn building up steam with the intent of lethal/non-lethal power indicated by the gauge on the right hand side. Once in the red, shoot to kill; less than that could be stun, or maim respectively. The glass indicator valve allows the user to know how much water is left within the internal boiler before adding more through the hatch located within the priming wall (where one loads the shell). Excess steam and heat is released from the right hand valve as a precautionary measure to prevent damage to the user after each shot. Approximate fire/reload time between shots, with the boiler prepped, is 60 seconds give or take your time to reload the shell, as the boiler remains actively building pressure between firing once the trigger is released. A 3-5 minute warm up is required for the internal boiler based on the electric heating coil within, so that said, make sure you know if you're heading into a fire fight. Keep your eyes open and your trigger finger at the ready....oh, and lean into the shot. She packs a punch."
---Capt'n J