HOME | DD

Description
This is a functioning 8 watt per channel valve amplifier that I built. The blue bars behind the glass are UVLED-illuminated acrylic rods. Those cans on top of the amp each has a transformer in it so this sucker is small but HEAVY, and it puts off a ton of heat... but it sounds oh-so-sweet. And louder than you might expect from something with only 8 watts.

I'm in the process of building a set of matching speakers, and will post them when finished.

You can see WIP photos of this project on my blog at www.coppersteam.com

Description
This is a functioning 8 watt per channel valve amplifier that I built. The blue bars behind the glass are UVLED-illuminated acrylic rods. Those cans on top of the amp each has a transformer in it so this sucker is small but HEAVY, and it puts off a ton of heat... but it sounds oh-so-sweet. And louder than you might expect from something with only 8 watts.

I'm in the process of building a set of matching speakers, and will post them when finished.

You can see WIP photos of this project on my blog at www.coppersteam.com