HOME | DD

Description

This artwork depicts a weapon which is a part of my sci-fi world's lore. Do not copy the design, use it in your own artworks, or claim it as your own!

Lore and Description:
P32.0 "Ushin" is an easy-to-manufacture SMG mass-produced by Targan for the Rotharnian army in the later stages of the Global War. The gun is chambered in 9.6 × 24 mm and fed by a 64-round helical magazine. The weapon utilizes the standardized Targan grip/trigger group module and a vacuum-formed polymer receiver housing. Sights and a folding stock are rather simple and made of metal. The weapon is a simple blowback-operated design, a telescoping mass on the bolt helps to keep the fire rate at manageable 600 RPM. Overall, the weapon follows the standard Targan philosophy - it is easy to manufacture and it gets the job done, at least most of the time. Soldiers using this weapon have given mixed feedback - some praise the magazine capacity and manageable fire rate, others were displeased by less-than-ideal ergonomics, including a flimsy and uncomfortable stock, and reliability issues with the magazine. Moreover, the large amount of polymer used in the construction means that the outer shell of the weapon has a tendency to crack or even melt after prolonged periods of sustained fire. It is therefore not uncommon to encounter worn "Ushins" repaired using various kinds of materials, including even zip ties and pieces of wood. Under regular circumstances, the weapon might not even been approved for use without addressing the most important issues first, but given the desperate situation Rotharn was in at the end of the war, anything that at least somewhat worked was deemed "good enough".

Inspiration and Background Information:
The design philosophy is slightly inspired by the Settlement Defense Front weapons from Call of Duty: Infinite Warfare, which appear to use unified grip/trigger group module and featuring parts which appear to be 3D-printed or manufactured using similar cheap methods. The overall configuration of the weapon is obviously inspired by the PP-19 Bizon and its "cousin", the PP-90M1.

Used Software:
Affinity Designer

If you like this deviation, do not hesitate to fav it, or leave a comment if you have anything to say. 🙂

Description

This artwork depicts a weapon which is a part of my sci-fi world's lore. Do not copy the design, use it in your own artworks, or claim it as your own!

Lore and Description:
P32.0 "Ushin" is an easy-to-manufacture SMG mass-produced by Targan for the Rotharnian army in the later stages of the Global War. The gun is chambered in 9.6 × 24 mm and fed by a 64-round helical magazine. The weapon utilizes the standardized Targan grip/trigger group module and a vacuum-formed polymer receiver housing. Sights and a folding stock are rather simple and made of metal. The weapon is a simple blowback-operated design, a telescoping mass on the bolt helps to keep the fire rate at manageable 600 RPM. Overall, the weapon follows the standard Targan philosophy - it is easy to manufacture and it gets the job done, at least most of the time. Soldiers using this weapon have given mixed feedback - some praise the magazine capacity and manageable fire rate, others were displeased by less-than-ideal ergonomics, including a flimsy and uncomfortable stock, and reliability issues with the magazine. Moreover, the large amount of polymer used in the construction means that the outer shell of the weapon has a tendency to crack or even melt after prolonged periods of sustained fire. It is therefore not uncommon to encounter worn "Ushins" repaired using various kinds of materials, including even zip ties and pieces of wood. Under regular circumstances, the weapon might not even been approved for use without addressing the most important issues first, but given the desperate situation Rotharn was in at the end of the war, anything that at least somewhat worked was deemed "good enough".

Inspiration and Background Information:
The design philosophy is slightly inspired by the Settlement Defense Front weapons from Call of Duty: Infinite Warfare, which appear to use unified grip/trigger group module and featuring parts which appear to be 3D-printed or manufactured using similar cheap methods. The overall configuration of the weapon is obviously inspired by the PP-19 Bizon and its "cousin", the PP-90M1.

Used Software:
Affinity Designer

If you like this deviation, do not hesitate to fav it, or leave a comment if you have anything to say. 🙂