HOME | DD
Okwa — Overview for Ha'tak(FJE)
#battleship #carrier #fanart #ortho #overview #sgc #spacecraft #spaceship #stargate #capitalship #stargateatlantisfanart #stargatefanart #battlestargalacticafanart #battlestargalacticastargate #battlestargalactica #military #sciencefiction #scifi #stargateatlantis #vehicle #militarysciencefiction #stargatecommand #crossoverfanart
Published: 2021-06-19 15:34:00 +0000 UTC; Views: 7863; Favourites: 42; Downloads: 0
Redirect to original
Description
Ha’tak-Class(Imperial):
Affiliation: Free Jaffa Empire(FJE)/ Imperial Jaffa Navy(IJN)
Typ: Battleship-Carrier-Hybrid
Number: N/A
Length: 1250 m
Width: 1250 m
Height: 519,2 m
Engine unit(s):
Sublight engine: Empal'tel Ellrupalka Ha’tak
Hyperdrive: Empal'tel Ellpalpalna Ha‘tak
Hyperdrive system: interstellar/ intergalactic (if equipped with additional energy sources and with hyperdrive turbocharger)
Shield System: Empal'tel Artal Jaf
Armament:
240x Emna Na'kekell ( Very Heavy Staff Turret), cal. 1400 mm
24x Ab’Bet Tyamka (Lances Cannon), cal 300 mm
60x Zat'tal'kekell Electric Beam Weapon (EBW)
Complement (maximum):
1920x space craft up to the size of a Tel'tak
Standard Complement:
80x Light Death Glider Interceptor (four squadron)
160x Heavy Death Glider Multirole Combat Spacecraft (eight squadron)
Role:
heavy reconnaissance
command ships for task forces
high precision planetary bombardment
fighting enemy forces
protection of trade routes
performing special missions
support for allied units (space and planetary)
support of battleships and carriers
mobile garrison/outpost
transport of planetary force vehicles
long-range artillery support for ground forces
Cargo Capacity:
2.646.270 m³ (maximum capacity when all hangars are used as cargo holds)
Specificity:
in terms of prestige and reputation, but also in terms of numbers, the most important warship of the Imperial Jaffa Navy
like many FJE designs, the Imperial Ha'tak is based on designs from the early and high Goa'uld era, in this case reminiscent of the legendary flagship of the System Lord Ra
despite this archaic design, the imperial Ha'tak correspond to the technical state of the art of the time
these battleship-carrier hybrids are also extremely variable and flexibly deployable multifunctional multi-purpose ships, as is usual for starships of this type
unlike their Republic counterparts, the Ha'tak of the Empire do not need a Ka'da (add-on modules) to do so
because the imperial Ha'tak proves that the Jaffa Empire's reputation for being much more conservative than the Jaffa Nation is more of a cliché as well as imperial wishful thinking.
republican Ha'tak, as it has always been customary on Ha'tak, have three hangars, which are located on one and the same deck, but do not form a hangar deck but three individual hangars, which are grouped like a protective wall around the most important ship components in the ship's centre
each of these hangars has the same size of 13300 m².
the Ka'da, originally an interim solution until the nation could develop its own full hangar decks, have proved so effective in practice that the nation has left it at the outdated hangar design
imperial Ha'tak also have three hangars, but according to modern requirements, these hangars are real hangar decks
this means that the entire corresponding deck can be used as a hangar
in fact, the corresponding decks are multi-purpose rooms according to the current standards for carriers
a special feature of the imperial design is that due to the pyramid shape of a Ha'tak, the size of the decks increases from top to bottom, this also applies to the hangar decks ( top hangar: 88210 m², middle hangar: 114673 m², bottom hangar: 149074 m²)
the hangar decks of the Imperial Ha'tak thus have more than 25 times the combined area of the three hangars of a Republican Ha'tak
The Jaffa Empire, of course, also uses the so-called "shape memory walls", or "shape walls" for short, to be able to subdivide the hangars (hangar in Goa'uld = Taka), which are in fact multipurpose rooms, according to current needs
due to the large total area and volume of the Taka, imperial Ha'tak have no need for Ka'da
all necessary components can be easily installed in the Taka
only additional or even heavier weapons, as with the "Quda" Ka'da ("Weapon"), cannot be built into imperial Ha'taks
However, this is not a disadvantage, as like all IJN ships, the Imperial Ha'tak is equipped with much more powerful weapon systems than her Republic counterpart
the only disadvantage of the imperial design compared to the republican design, is the time needed to adapt the imperial Taka to the current situation
the complete exchange of all six Ka'da at a Ha'tak of the Jaffa Nation requires, even without a shipyard, a maximum of 3 hours (90 minutes for undocking all docked Ka'da, 90 minutes for docking 6 new Ka'da)
how long a complete conversion of a Taka from one task to another task takes depends on how different the two tasks are from each other
the change from hangar use to cargo space use takes hardly any time at all
The change from hangar use to use as a hospital or research laboratory can take one to two days, depending on the level of equipment, even in a suitably specialised shipyard
In practice, however, this disadvantage is limited, as it is rare for a complete Taka to be dedicated to just one task, mostly hangar or cargo space missions, and these completely dedicated Taka are usually only converted if absolutely necessary
usually the taka are divided into individual sections by "shape walls" and only individual sections need to be converted, taking care that the differences in equipment between the previous task area and the later task area are as small as possible
this greatly reduces the effort required for conversion
the imperial Ha'tak design has, on the other hand, one real major advantage over the republican design.
the republican Ha'tak has the traditional pyramid-shaped depression on the underside, which has enabled Ha'tak to land on a pyramid for structural support during planetary landings since the times of the Goa'uld
imperial Ha'tak, on the other hand, have a flat, square depression on the underside.
this multi-purpose area is equipped with various short-range and long-range tractor beam emitters, with which an Imperial Ha'tak can tow objects up to a volume of 270.312.500 m³
but one or more starships can also be docked here, with a maximum size of a Tar'ad-Class cruiser
with suitably equipped Taka, the shield around the multipurpose area can be completely filled with a breathable atmosphere, so that the engineers of a Ha'tak, dressed only in light protective clothing, can work on starships docked here
this greatly simplifies and speeds up repairs, as the engineers do not have to rely on bulky spacesuits for space repairs, as republican engineers do at the "Ell'Shada" Ka'da (dry dock) of the Ha'tak of Jaffa nation.
however, the "cargo" located here must be removed before a planetary landing, so that the repairs can only take place in space
during planetary landings, the tractor beam emitters installed in the depression are reversed in polarity so that they act similarly to antigrav emitters
This creates an energetic landing field under the Ha'tak that protects the structural integrity of the spacecraft to such an extent that Imperial Ha'tak can land on virtually any planetary surface: solid rock, sand, water, lava, even on the top of a mountain
Ha'tak of the Jaffa Nation, on the other hand, can only land on solid ground, preferably on a supporting pyramid.
in terms of operational doctrine, republican and imperial Ha'tak are very similar
the imperial Ha'tak can also be best described as a mobile garrison and is otherwise the jack-of-all-trades ship of the Jaffa Empire
Only when used as flagships are there strong differences
while in the JNN the Sa'far-Class could not really establish itself as a fleet flagship and therefore mostly Ha'tak are used as fleet flagships, even of the largest and most important fleets, in the IJN the Ha'tak are at best used as flagships of insignificant, small fleets
all important and large fleets are commanded from Mah'arib-Class ships
-----------------------------------------------
Model made in: Sketchup
Model: me
Related content
Comments: 13
👍: 1 ⏩: 1
👍: 0 ⏩: 1
👍: 0 ⏩: 1
👍: 0 ⏩: 1
👍: 0 ⏩: 1
👍: 0 ⏩: 0
👍: 2 ⏩: 1