HOME | DD
SickleYield — Sneak Preview: SY Supermorphers for Genesis 8
#daz3d #morphing #morphs #sickleyield #dazstudiopro49
Published: 2018-02-06 18:50:34 +0000 UTC; Views: 3087; Favourites: 18; Downloads: 84
Redirect to original
Description
Accepted for testing this morning at Daz3D, this is a set of dress/tunics and bodysuits that can be used for transferring morphs that work better than those generated by Autoconform. In a most cases you will never have to take the morph into a modeling software, and all the Body Morphs as well as all current Daz3d characters are supported; I will continuously update as new characters are released.(In fact, it probably won't come out until March sometime because some of the characters it supports are not released yet.)
There are clip fixer morphs included too, so if the transferred morph clips and you don't like the look of smoothing, you can use the fixers to update it. This is licensed as a merchant resource. You can use these FBMs/PBMs in your freebies and products. And there is a full .pdf manual linked from the folders.
Related content
Comments: 31
So I got the male version in my cart but I need more info on it so I know what I'm doing with the product. Is there an informational video? I looked at your YouTube channel and there is nothing there for this product. I did start a thread at the DAZ forums as well.... Thanks hon!
www.daz3d.com/forums/discussio…
👍: 0 ⏩: 1
It comes with a manual linked from the clothing folder the Supermorpher suit and tunic are in! I haven't done a video.
Short version:
You load your item into the scene; it must already be rigged and saved.
You load the morpher into the scene.
You start Transfer Utility and choose the morpher as source and the clothing item as target.
In the Transfer Utility options you select Morphs and All from the Morphs dropdown.
Accept.
Save the morphs to the library so you can use them again on the target item.
Another method you can use is to conform the clothing item TO the supermorpher, then select all the supermorpher morphs (right-click on one and choose edit first), then set all those morphs to a value higher than 0.1 by right-clicking and setting the value option. Then you can unconform the clothing from the morpher and now it has all the morphs. Sometimes this method gets smoother-looking results.
There are a couple of additional techniques in the manual also but those are the broad outlines.
👍: 0 ⏩: 0
Afraid you lost me there. So you put those tunics/full suits on, they fit themselves to the character and it's applied morphs, and you can then transfer the shape of those make-shift clothes as some sort of auto-created morph to the item you actually want to fit? If that is what is does, it sounds great. Wish it were for G3 then. Will I actually be able to safe clothing with newly injected morphs or will I have to repeat the process it on every occasion? I tried with Zev0's Fit-morphs, but... well, I very much surmise that can be done, it's just me I suppose.
👍: 0 ⏩: 1
You don't fit them at all. The morphs are already in the tunics and suits. You can transfer them to the clothing without the intervention of the figure. The morphs can be saved after they're transferred so they don't have to be loaded twice.
I'm probably not going to do it for G3. It took a LONG time to get these done because I had to tediously and manually create every single FBM and PBM that is supported. I'm not doing it again for the entire G3 morph library, lol. There's not enough money in the entire market.
👍: 0 ⏩: 0
I don't know if you've been told this yet but you are one of the most awesome individuals to grace the planet.
👍: 0 ⏩: 1
Looks interesting! I'd imagine a heck of a lot of work is behind this!
👍: 0 ⏩: 0
So, going by the images, can we assume these as yet unreleased Daz characters are 'outsize'?
If so, Perhaps someone should think of a line in comfy MuuMuus now that Daz figures are going outsize?
👍: 0 ⏩: 2
I actually have a pj set in the works that i crafted the 'comfy' in and the autoconform out. especially for bigger breasts and bellies. it should be out fairly soon either at daz or rendo 
👍: 0 ⏩: 1
Pj set?
I could do with a pj set that isn't shorts and slinky top.
Might have to delay any purchase if it's dForce though - I'm still having OpenCL issues*
- I'm one of those weirdos who runs Daz on Linux, and I'm still having issues with OpenCL on Wine.
👍: 0 ⏩: 1
well it wasn't originally built with dforce in mind but as I started playing with dforce I did some testing and so far all the pieces work. and no, its legit PJ set. Looks like something you'd buy at walmart or target for your 2 year old, 10 year old, 16 year old, and 60+ year old. Hell I'm 35 and I wear a onesie on occasion so I suppose even that middle demographic is targeted
👍: 0 ⏩: 1
Great, I'll keep my eye out for it.
👍: 0 ⏩: 0
The Heavy, Pearfigure and Stocky morphs already come with the Head and Body morphs! This is a Heavy character and a Stocky/Bodybuilder mix. I can't show unreleased morphs on my deviantart or I'd violate my NDA with Daz and lose my store, so if you see it here, it pretty much has to be already out.
Mind you I probably will do Big Beautiful Genesis 8 at some point. The one for Genesis 2 did extremely well.
👍: 0 ⏩: 1
Nahh, I know NDA...
I thought the big charas in the sample pic were more than a hint....
I just bought the two EJ big charas today anyway, and my fav G3 is Opal by Saiyaness, and I have most of AliveSheCrieds shape sets.
👍: 0 ⏩: 1
Opal is pretty great. I did support George with the male version.
👍: 0 ⏩: 1
Abel is kind of interesting, but for some reason, Abel looks unwell (to me), while Opal is this robust mature lady brimming with health and adventure and mischief.
Abel needs a bit more meat on him. I'll pick him up at some point no doubt, excellent textures...
👍: 0 ⏩: 0
Wow! This looks like great concept and execution!
👍: 0 ⏩: 0
Thank you...I have your BBW set and have started creating some figures. I will be sure to include your new set when available!
👍: 0 ⏩: 0
hmm.. i'm not sure what i'm seeing here - is this something like your Super Clip Fixer (i got the genesis 1 version) with added tunic, i.e. something for us end users, or is it more for content creators to help them with clothing creation? i guessed the 1st but i'm not sure..
👍: 0 ⏩: 1
Both. The user has to be willing to actually read the manual, and some won't do that, but it's certainly possible to use it to add morphs to your existing wardrobe for your own render use. Once you have the process down you can fix up an outfit in like a minute (and it's only that long because it has to be repeated for each piece in the outfit that requires morphs).
Ultimately I made it because I want it myself, but my poll of other content creators said a lot of them wanted it, too.
👍: 0 ⏩: 1
okayyyy. well i'll wait until the official announcement then - this sure is plenty useful ^^
next to clothing and all kind of "finished products", all the amazing utility stuff you create is too good to keep it for yourself
👍: 0 ⏩: 0
Now that looks vewwwwy interesting.... I'll start saving my pennies...
👍: 0 ⏩: 1
Will you get this to work with Genesis 3? George still gives me fits...
👍: 0 ⏩: 1
Probably not. Setting up custom FBMs for the items on this took a really long time. Setting it up for G3 isn't very feasible timewise.
👍: 0 ⏩: 1
So... George will give me more unfits... *sigh*
👍: 0 ⏩: 0