HOME | DD
MMD3DCGParts — MMD Tutorial How to remove un-needed groups
#mmd #mikumikudance
Published: 2015-07-20 20:58:58 +0000 UTC; Views: 13389; Favourites: 198; Downloads: 109
Redirect to original
Description
Panel 1 - My MMD is lagging when I use my edit and I have done everything right! (Meaning un-needed joints and physic)
Well it seems you have to many groups.
Panel 2 - Open PMDE and go to the 8th tab (GRP)
PMXE version - Open PMXE and go to the 7th tab (Display Pane)
Panel 3 - Ignore the Fac box and don't use it (PMXE users don't have this box)
You want to pay attention to the bottom left box and the box next to it.
Panel 4 - Now move down till you find one without anything in the box.
Panel 5 - Right click and click deleted.
You can also just hit "Delete" on your keyboard.
Panel 6 - Once you are done removing the un-needed groups it should look like this. 45 groups to 9 groups.
Also keep in note make sure what you are deleting before you delete it because if you delete something that has bones in it the model you want to use will mess up.
Side note - It also reduces the size of the file. 1,712 KB to 1,708 the more you remove the lower the number goes.
Panel 7 - Now you don't have any un-needed groups and some of the lag should be gone.
This will only stop some of the lagging and maybe all of it, matters on how many un-needed groups you have.
PMXE downloads –
akiiza-sama.deviantart.com/art… How to download PMXE
eoscustom3d.deviantart.com/art… English PMXE
ibozo.deviantart.com/art/PMDEd… English PMXE/PMDE in case you wanted 2 editors in one. This will make step 4 easy since you can just load in the model (The one before the model messed up) normally and just throw in the parts. Then just switch over to PMX (as seen in the picture of the link) then just save as .PMX.
If your model is still lagging then check you joints and physics - mmd3dcgparts.deviantart.com/ar…
Also make sure you remove all un-needed polygons / vertices - tehpuroisen.deviantart.com/art…
Model by
Related content
Comments: 27
This was very helpful for me when I started using pmd/xeditor.
But still there is one thing I can't figure out.. Some models have duplicated facial group in the display and the one that isn't at the top can't be deleted. How can I do it??
👍: 0 ⏩: 0
thank you for instructions... where can i get this model?
👍: 0 ⏩: 0
This was really helpful, thank you for uploading this
👍: 0 ⏩: 0
it should be the same thing hopefully
👍: 0 ⏩: 0
First off I would like to say thank you so much, I have several edits that take 10 to 20 minutes to load up on MMD and this made it seconds. I really can not thank you enough for this. I'm flabbergasted to be honest, I really have no words. You saved my models and I appreciate that!!!!
👍: 0 ⏩: 0
This is really useful! Thanks for the tutorial!
👍: 0 ⏩: 0
THANK YOU
This helped me so much! Now I can finally share my edit ;v;
👍: 0 ⏩: 0
Okay, I really need help.
I've been making a model, but I can't open it in MMD because it always crashes when I do.
I've deleted unused physics - Still crashing.
I've deleted un-needed groups - Still crashing.
I've deleted unused joints - Still crashing.
I can't find any unused vertex - STILL CRASHING..
I can't find any unused bones (because I don't know how) - STILL CRASHING..
I've even deleted the freakin hair physics YET IT STILL CRASHES ._.
I'm starting to lose hope here, is there something I can do?! ;_;
👍: 0 ⏩: 1
Well I have a few things I can suggest.
1. Make sure all the physics and joints are connected right.
2. Delete all the physics and joints and re-make them. -Look around DA for tutorials on how to work them-
3. Re-do the model and make sure ever part you used a clean.
👍: 0 ⏩: 1
Thank you so much! I'll try to do that.
👍: 0 ⏩: 1
Your welcome and I hope it helps. 0v0b
👍: 0 ⏩: 0
hi um..does this include on how delete the tits problem...? or am i wrong?
👍: 0 ⏩: 1
No this is to reduce some of the lag and clean up the model so when you load the model up the side bar won't be filled with un-needed groups.
But it sounds like you are having a physics and joints. There is a few ways to stop the boobs from moving.
1.You can remove the skin under the clothes which will also stop any/most clipping errors.
2.You can go to the physics tab and turn the boob physics off.
3.You look at the physics on the model and removing any over lapping physics in that area you are having problems with.
Tip - When using parts/bases sometimes they won't have boob bones. So 1. Either make sure the parts you are using has the same bone. 2. Learn to rig.
👍: 0 ⏩: 0
thanks but my MMD still lags....
i don't know why... ;-;
👍: 0 ⏩: 1
Sorry for the late reply.
Did you check if it has un-needed joints and physics?
Did you remove the un-wanted polygons / vertices?
👍: 0 ⏩: 1
It's okay.
I already fixed my MMD but thank you for your reply~
👍: 0 ⏩: 1
Ah alrighty. 0v0/
If you have any more questions on MMD/PMDE I will try my best to answer them if i'm online. 0v0b
👍: 0 ⏩: 1
Okay thankies, i will ask you if I do have any more questions.
👍: 0 ⏩: 1
thanks for the info. useful and concise. and i really like the model you used.
👍: 0 ⏩: 0
