HOME | DD
Phineas77 — GIMP Lineart Tutorial 2
by-nc-nd
Published: 2010-01-22 21:58:35 +0000 UTC; Views: 48525; Favourites: 1304; Downloads: 808
Redirect to original
Description
IF YOU HAVE A PROBLEM WITH ROUGH/PIXELLATED LINES CLICK HERE!Or try using a soft-edged brush.
~sashas Tutorial reversioned for the GIMP. Sorry for it's suckishness :
Original Tutorial: [link]
This is mostly just a reference for GIMP settings, I've learned after doing this for a little while that you just have to really get a feel for it. There's a lot of Ctrl+Z involved.
Anyway, hope this helps, if you have any questions don't hesitate to ask ^^
Related content
Comments: 393
Thanks so much for this tutorial!
NOW I CAN MAKE A GOOD LINEART BJDAJKBSJASBHJABS.
👍: 0 ⏩: 0
I have spent hours reading tutorials and yours is the best one I have found so far. Thank you!!
👍: 0 ⏩: 0
when i have traced the line (of a section of my drawing) and finished with all the anchors and such, how do i get rid of them?
👍: 0 ⏩: 0
This has worked wonders for me so far. Thank you SO much for posting this!!
👍: 0 ⏩: 0
OMG this helped SO MUCH!! finally a tutorial I understood Thank you!
👍: 0 ⏩: 0
thank you SO much! I've been looking all over for a tutorial like this! all of the others are so confusing!
👍: 0 ⏩: 0
This really helps, finally able to make linearts that actually look good! Thank toy so much for uploading this!
👍: 0 ⏩: 0
OMG I MADE IT ! THHHHHHHHHX u helped me alot!
👍: 0 ⏩: 0
i love u 0w0.... this helped like OMG .....yessssss
👍: 0 ⏩: 0
Omg I LOVE you for making this. You just made me so much happier, since my lineart usually looks so flat. >_> Time to test this out C:<
👍: 0 ⏩: 0
THANK YOU! This helps a LOT!!! ^^
I have one thing to ask though..:
When I draw my lines with the path tool, set my anchors and stuff, and all that good stuff, my lines don't come out near as clean as yours does.. 
Anyways, Great Tutorial! ^^
👍: 0 ⏩: 0
Thank you so much for this! It's been helping me. However, I'm having a couple of problems. No matter what I do my lines don't come out as smooth as yours, and for some reason the lines are thin in some places and thick in others. I can't seem to get it right!!
👍: 0 ⏩: 0
hot DAMN does this help! thanks so much...i know this is old and shit but whatever.
👍: 0 ⏩: 0
Most helpful tutorial Ive found yet! Thanks so much!
👍: 0 ⏩: 0
Can I say that this is a quite useful resource! But I much rather the look of the sketch better, but maybe that's just me?
👍: 0 ⏩: 0
I know I mist be retarded but how do you hide the original sketch so you only see the new lines??
👍: 0 ⏩: 1
Delete the first layer original layer....... then like fill in the transparent spaces with white using fill tool;D
👍: 0 ⏩: 0
THANKS! but i have a question...
When i do my lineart ...amm the las part of line is Circle , and not dissapear. Is.. So hard and not is soft..
👍: 0 ⏩: 0
Will use this from now on when I do my work. Thanks ^.^ Great Tut
👍: 0 ⏩: 0
<3 <3 <3 <3 <3 <3 <3 <3 <3 <3
You SERIOUSLY saved me SO MUCH TIME!!!
Thank you sooo much!!!!!
<3 <3 <3 <3 <3 <3 <3 <3 <3 <3
👍: 0 ⏩: 0
this helped me alot, but i still cant figure out how to connect the lines without making fat then thin lines. But this is an amazing start, i hated the path tool before and now its so useful!
👍: 0 ⏩: 0
great tutorial! my life changed after seeing it, seriously, i am awful with the computer
👍: 0 ⏩: 0
Sorry, when I'm going to do point with Stroke Line, I'm clicking that all correct, but there's a problem. Communication from GIMP: Not enough points.
What I will have to do?
Please, help.
👍: 0 ⏩: 0
yay!!! thanks for making this tutorial , it was very helpul for me!!!
👍: 0 ⏩: 0
Every time I get to the "Stroke Path" and then selecting "Stroke," my computer shuts out of the program! I don't know what's wrong with either my computer or the fact that I have Gimp 2? Do you know what the problem could be?
👍: 0 ⏩: 0
I'm gonna give you credit for the lineart on this pic I drew
👍: 0 ⏩: 0
Thank you very much !
Do you now how to open several pictures on 1 file ?
👍: 0 ⏩: 0
This is amazing. Its so much easier than pen....... Thank you so much.
👍: 0 ⏩: 0
Oh my god thank you!!!!! I have been trying to find out how to draw with GIMP for ages!! This helped more than you know!
👍: 0 ⏩: 0
Wow this tutorial is EXTREMELY helpful. Thank yo so much for posting.
👍: 0 ⏩: 0
It was helpful to me! I'm already friendly with the path tool, but the brush size trick was cool! Also the brush dynamics settings are cool too! Thanks!^^
👍: 0 ⏩: 0
thanks for the awesome tutorial! i had no idea what to do with the paths tool before this.. X)
👍: 0 ⏩: 0
Thanks!!
You gave this awesome tutorial!!!
You are my hope noww!!! (Cuz I always fail if I line arting XD 
👍: 0 ⏩: 0
OMG... O...M...G Thank you so much!!! I've been needing this for like... umm..
I don't know how long actually
Thanks again!
--
▄██████████████▄▐█▄▄▄▄█▌
██████▌▄▌▄▐▐▌███▌▀▀██▀▀
████▄█▌▄▌▄▐▐▌▀███▄▄█▌
▄▄▄▄▄██████████████▀ FEAR THE FAIL WHALE
👍: 0 ⏩: 0
this turtorial has helped me so much >w<
before i didn't draw or color with my gimp, barely used it lol
but from this tutorial i learned line-art which has also helped me with other things on gimp.
here's what i made right after studing the tutorial [link]
👍: 0 ⏩: 0
actually i do have a question:
how do i keep the lines from getting too thick? at the moment, i'm working on the hair section of my character and i intended SOME of the lines to be thin :/
do i just adjust the brush size continuously throughout the process?
👍: 0 ⏩: 0
anyway, thanks so much for this tutoriaaaaaaaaaaaaal
👍: 0 ⏩: 0
| Next =>