HOME | DD
RedShotRonin — Oblivion Keyblade Tutorial
Published: 2009-04-04 03:12:45 +0000 UTC; Views: 39043; Favourites: 414; Downloads: 919
Redirect to original
Description
Well, here it is finally. It's long and big, so be prepared. I hope you guys have a good time with it and get some awesome stuff from it!Good luck with any Oblivions you take a crack at, and if I missed anything or you have other questions, feel free to ask. By the way, it should say Emiline down at the bottom there. I've no idea why the last line didn't show up. And why I didn't notice it until now. Oh well.
The work waits! Get to it!
Related content
Comments: 172
this is awesome! i'm defiantely gonna try now!! ^.^
i was gonna use thin sheets of wood and sandwich them together, but this is way eazier
👍: 0 ⏩: 1
Yay for somebody giving it a shot! Good luck with it, I hope it turns out wonderfully ^-^
Feel free to ask questions if you run in to any troubles.
👍: 0 ⏩: 0
where can you get the base foam thingy?
👍: 0 ⏩: 1
You can get the solid housing foam stuff at places like Home Depot and Lowes. It's back in the lumber sections.
👍: 0 ⏩: 1
and how thick is this thing?
👍: 0 ⏩: 1
With the model magic pieces, it's about 2" thick in places. The solid housing foam by itself is only about an inch thick.
👍: 0 ⏩: 0
....Thank you so much.
I'm glad you think Mary would enjoy it ^-^
👍: 0 ⏩: 1
yeah just i was onto the cutting phase of my fenrir keyblade but my lame as pareants said i cant ude it 
i am too lazy to draw another one and t was on wood
👍: 0 ⏩: 1
Bummer. Tracing paper might help to transfer it if you get up to having another go at it.
Good luck!
👍: 0 ⏩: 1
yeah, but i might just draw another pic or i might not draw fenrir nxt time i wanna do bond with flames or that other one ultima
👍: 0 ⏩: 1
Ultima would be tough, it's nice and complicated. >.<
👍: 0 ⏩: 1
is this solid like wood or or mushy like foam
👍: 0 ⏩: 1
It depends on how you make them. I coat all mine with resin, it gives them a protective hard outer shell. (Sort of surfboard-esque) Keeps them light, but durable.
If you make them without that step, there are some other ways I've included in the tutorial to reinforce them somewhat, but they will be more fragile.
👍: 0 ⏩: 1
where do they sell resin at building shops and how do you put it on cause wood is heavy so i am thinking of now making it of foam where do you get it
ps sorry for asking about where you get all the stuff
👍: 0 ⏩: 1
It's no problem at all. I've ordered the resin from a couple of different places, here's one of them: [link]
You can also special order it from shops like Sherwin Williams.
How to put it on is mostly explained in the tutorial, if you need further directions, just try to say what part you need help with.
AS A NOTE! Home Depot and like places do carry regular resin, but it is AMBER colored and WILL EAT FOAM! If it's clear, it'll probably do just fine, but test a smudge or so before drowning your project in it.
...Just a warning.
👍: 0 ⏩: 1
thanks is methylated spirits a resin ?
👍: 0 ⏩: 1
No, resin is an epoxy that comes in two parts that mix together and harden in to a hard plastic like texture.
👍: 0 ⏩: 1
so you saying i could get this at a bulding shop ?
👍: 0 ⏩: 1
Try either a specialty paint shop or an arts and craft type store
👍: 0 ⏩: 1
<= Prev |