HOME | DD

Description
This is part 3 of 4 of the finished pattern, I am releasing.
The pattern is for a highly detailed Toothless-inspired plush dragon.

Note, this image is of exactly A4 size and made for printing:
Do not let your printer resize the image - instead, have it crop the edges, that fall outside of the printable area.'

Remember that all pieces that are not spikes or claws will NEED a ½cm seam margin. Don't forget to add this.

For a reference on the pieces, please see the Piece Overview here:
[link]

_____
Previous:[link]
Next:[link]

_____

A FEW TIPS ON ASSEMBLING THE HEAD:
Okay - so you made it this far.

Pieces B and C are essentially the same piece - but if you're using fabric with different textures or feels on each side, this is an indication, that one of the pieces should be mirrored - so we don't get a two-face dragon.

1) Firstly:Cut out all the head pieces.
2) Secondly: Attach the eyes, if you're using fabric eyes like I did. If you have resin or plastic eyes, you may want to wait until after step 4.

Then have a look at this picture:
[link]
An early prototype - the pattern is incorrect, but the instructions are fine - so use the pattern on this page´- follow the instructions in the link

Description
This is part 3 of 4 of the finished pattern, I am releasing.
The pattern is for a highly detailed Toothless-inspired plush dragon.

Note, this image is of exactly A4 size and made for printing:
Do not let your printer resize the image - instead, have it crop the edges, that fall outside of the printable area.'

Remember that all pieces that are not spikes or claws will NEED a ½cm seam margin. Don't forget to add this.

For a reference on the pieces, please see the Piece Overview here:
[link]

_____
Previous:[link]
Next:[link]

_____

A FEW TIPS ON ASSEMBLING THE HEAD:
Okay - so you made it this far.

Pieces B and C are essentially the same piece - but if you're using fabric with different textures or feels on each side, this is an indication, that one of the pieces should be mirrored - so we don't get a two-face dragon.

1) Firstly:Cut out all the head pieces.
2) Secondly: Attach the eyes, if you're using fabric eyes like I did. If you have resin or plastic eyes, you may want to wait until after step 4.

Then have a look at this picture:
[link]
An early prototype - the pattern is incorrect, but the instructions are fine - so use the pattern on this page´- follow the instructions in the link