HOME | DD
Trackdancer β MMD Tutorial - Working Floor
by-nc-nd
Published: 2012-07-11 02:35:38 +0000 UTC; Views: 57236; Favourites: 460; Downloads: 1116
Redirect to original
Description
A basic tutorial on how to set up MME MirrorWF_v002Notes:
Vocaloid model - Meiko EvoX by Nakao
MME - MirrorWF_v002
Download links?
Related content
Comments: 270
Thanks for this. Comment featured for future reference.
π: 0 β©: 0
you've a lot of MME here, espescially Working floor
nekomimi-girl.tumblr.com/mme
π: 0 β©: 1
How do you make the mirror show the image?? It won't let me see the reflection of the models ;-;
π: 0 β©: 1
It's possible that the effect doesn't work with your graphic card. If it works, you should be able to see the reflection immediately.
π: 0 β©: 1
Yeah, I found the problem... I needed MME so I finally got it XD
π: 0 β©: 0
When I load WorkingFloor v2, it's just white. I've read below that my computer doesn't support the effect, but how do I make it support the effect?
π: 0 β©: 1
Hmmm ... buy a new computer or more powerful graphics card. It's usually a hardware issue so there's no cheap fix. The Japanese MMDers tend to have some kickass PC systems and some of the best effects are written for machines with these specs.
π: 0 β©: 0
I have WorkingFloor, but it won't show up, and I want it to be able to put a reflection on a stage I already have.
π: 0 β©: 1
Apparently, the effect doesn't work on all systems. Sounds like you might have that issue.
π: 0 β©: 1
I got it to work, sometimes it works and sometimes it doesn't, and I don't know why.
π: 0 β©: 1
Something running in the background is clashing with the effect. Try and figure out what it is and disable it whenever you want to run the effect.
π: 0 β©: 1
How can I disable it? The color of the effect changes with the background.
π: 0 β©: 1
I can't really answer your question as I don't have access to your computer. Get someone with good technical know-how who can physically access your PC to resolve this issue.
π: 0 β©: 1
Okay, thanks anyway.
π: 0 β©: 0
Uhm... I got a weird problem again. So. I didn't have to rotate the floor. But then this happened:Β prntscr.com/5kfq9w You see his reflection? What the hell did I do wrong?
π: 0 β©: 2
its always the graphics card i swear im running a gtx 970 i really doubt that much isn't supported i would assume that about 99% of the effects i support.
π: 0 β©: 1
It's possible that your video card doesn't fully support the effect.
π: 0 β©: 1
And yet the tk_flowf works.
π: 0 β©: 2
Same here it used 2 work for me but now only tk_flowf works so I just use the shadow feet and mirror effect from tk_flowf
π: 0 β©: 0
Different MME authors code in different ways and on/for computers with different specs. This lack of standardization is at the root cause of a lot of MME (and MMD modeling related) issues and unfortunately, since these are offered as "freeware" we can be too picky and just use whatever ones work and just ditch the ones that don't.
π: 0 β©: 1
Well... Until my hard drive blew up... I could use everything but water. Now I can use water.... And not working floor. Is it because my system is now 64bit?
π: 0 β©: 1
Lemme guess: Never heard of this error before
π: 0 β©: 1
Nope, more like: "How do you expect me to diagnose a problem on a PC that I don't have in front of me, for which I have no specs for and on which I have no idea what other junk is loaded?"
A psychic I am not ... ^^
Please don't expect me to diagnose your junk, I have my own to deal with. If you have a problem using the effect (as in applying it to an actual MMD project) fine; but if you want me to tell you why it isn't working on your equipment, from where I'm sitting, my guess is probably as good as yours.
ie. No idea ...
π: 0 β©: 1
Pfff I understand. I'm gunna go off and use your your tutorial on how to make an adult model a child.
π: 0 β©: 0
When i use MirroeWF_v005 it doesnt work it just sits there as a grey panel with no back
π: 0 β©: 2
Unfortunately, what you have indicated is that your system (graphics card most likely) doesn't support the effect.
π: 0 β©: 2
Hey i got it to work
π: 0 β©: 0
Nvm its now that there is no reflection
π: 0 β©: 0
I've looked up this floor OVER and OVER and I can't find it ;_;
I think it's on mikumikubeat but I can't locate it there
π: 0 β©: 2
harigane.at.webry.info/201010/β¦
π: 0 β©: 0
You can get it here: harigane.at.webry.info/201010/β¦
Press Ctrl+F and type in "MirrorWF", that should be it
π: 0 β©: 1
You're welome
π: 0 β©: 0
When I load up Working floor for some models the actual reflection doesn't show up.
π: 0 β©: 0
Erm, When i use an effect like particle fx, some weird white blocks show up reflecting the effect, but the top just show the sparkles. Is there any way to make the weird blocks dissapear?
Heres an example:Β atwiki.deviantart.com/art/Helpβ¦
π: 0 β©: 1
I don't think there's a fix for that.
π: 0 β©: 1
wut? dat stanks -_-
So its one or the other, eh?
π: 0 β©: 1
Yep, unfortunately. To be blunt, probably about 30% of the MME effects I download either don't work, crashes my PC or is flaky in some manner.
π: 0 β©: 1
<= Prev | | Next =>